ant' Posted October 6, 2011 at 06:16 AM Posted October 6, 2011 at 06:16 AM Hello tout le monde, Il me semblait qu'il y avait un topic pour les soucis informatiques mais je ne le retrouve plus. J'ai un soucis avec internet, je n'arrive plus à accéder à certains site, en fait si j'y arrive, mais pas totalement et très difficilement. Le pire doit être guitariste.com, je ne peux plus accéder au contenu du forum, les pages ne se chargent pas. Youtube marche une fois sur 2. Voila les petits désagréments.. J'ai essayé de rebooté ma Freebox, sans succès. Cela dur depuis 2 semaines environs, peut être plus. Je suis une méga quiche en informatique, si quelqu'un peut m'aider.. C'est cool ! merci Quote
Shing Posted October 6, 2011 at 06:22 AM Posted October 6, 2011 at 06:22 AM Tu es sous que Os et sur quel navigateur? Quote
Fabinosto Posted October 6, 2011 at 06:27 AM Posted October 6, 2011 at 06:27 AM Et WIFI ou ethernet ? Quote
Jazz Ad Posted October 6, 2011 at 06:44 AM Posted October 6, 2011 at 06:44 AM TU as commencé par vider ton cache ? Quote
mikhailo Posted October 6, 2011 at 07:49 AM Posted October 6, 2011 at 07:49 AM Si ça se met à déconner d'un coup et pour des sites différents, c'est que soit tu utilises le Wifi sur ta freebox et quelqu'un d'autre a cracké ton mot de passe (à envisager dans le cas des mots de passe comme "soleil", "maison", "motdepasse", "password", etc), soit il y a un problème sur ta ligne. Si tu n'utilises pas toi-même le Wifi, ça peut être bien d'aller dans l'interface d'administration de la Freebox et le désactiver. Si ce n'est pas ça, je pense que ça vaut le coup d'appeler le SAV de Free, ils sont très réactifs: il y a un mois, j'ai eu un souci, je les ai appelés dans la matinée, et le soir même un technicien est passé chez moi vérifier la box, la ligne, et a fait tout ce qu'il fallait. Quote
diad Posted October 6, 2011 at 08:55 AM Posted October 6, 2011 at 08:55 AM Alors oui il faudrait répondre a toute ces questions : - PC/MAC ? - Version de windows ou autre - Wifi ou cable ethernet - aussi as tu bien mis a jour ton navigateur Web (lequel utilises tu) - A voir ta version de flash aussi Bonus : - Cb de place te restes t il sur ton C: (si windows). Quote
ant' Posted October 6, 2011 at 10:09 AM Author Posted October 6, 2011 at 10:09 AM J'ai vidé mon cache, problème résolu. Je vous avais dit que j'étais nul.. Merci beaucoup Quote
Ze bass Posted October 6, 2011 at 10:29 AM Posted October 6, 2011 at 10:29 AM Salut, une solution à ton problème peut être Firefox. En effet ce navigateur propose dans ses options de vie privée de vider le cache, les cookies et les historiques chaque fois que le navigateur est fermé. Si en plus tu rajoutes un CCleaner paramétré pour tout nettoyer chaque fois que tu allumes ton ordi, tu devrais être pas mal ! a+ Quote
ant' Posted October 6, 2011 at 10:30 AM Author Posted October 6, 2011 at 10:30 AM Merci pour le conseil Ze Bass (effectivement j'utilise FF) ! Quote
LE_Gui Posted October 6, 2011 at 11:10 AM Posted October 6, 2011 at 11:10 AM Si ça se met à déconner d'un coup et pour des sites différents, c'est que soit tu utilises le Wifi sur ta freebox et quelqu'un d'autre a cracké ton mot de passe Sans aller jusqu'à parler de hack, la présence de plusieurs boxes sur le même canal suffit pour foutre le boxon. Mais bon, problème résolu, donc affaire réglée Quote
grain Posted November 3, 2012 at 02:44 PM Posted November 3, 2012 at 02:44 PM Je me permets d'utiliser ce topic pour poser une question suite à un problème que je rencontre avec mon ordinateur fixe (avec Ubuntu en OS) : l'ordi s'allume mais rapidement les opérations en cours s'arrêtent et l'écran ne reçoit plus d'information (il devient noir). L'ordi continue pourtant de tourner (le ventilateur de l'alimentation et celui du processeur tournent) mais on ne peut plus rien faire, à part le forcer à s'éteindre pour redémarrer. Ce n'est pas un problème d'écran. Des idées d'où pourrait venir le problème ? Quote
Pierre-Antoine Roiron Posted November 3, 2012 at 02:55 PM Posted November 3, 2012 at 02:55 PM Essaye de démarrer en mode réparation, et de faire les opérations suivantes dans la console : sudo apt-get autoclean sudo apt-get check et si tout va bien sudo apt-get update sudo apt-get upgrade Avec ça, tu élimines un paquet d'éventuels problèmes logiciels. L'écran devient noir après le login, avant? QUelle version d'Ubuntu? Quote
grain Posted November 3, 2012 at 03:55 PM Posted November 3, 2012 at 03:55 PM Merci pour la réponse. Je viens de suivre tes recommandations, on va voir si ça le refait (des fois ça met un peu de temps avant que l'écran ne devienne noir. D'autres fois, je peux encore bouger la souris mais plus rien ne répond). C'est la version 10.04 LTX Lynx lucide qui est installée dessus (mais je préviens : je suis une grosse buse avec Ubuntu). Quote
grain Posted November 3, 2012 at 04:07 PM Posted November 3, 2012 at 04:07 PM Bon, ça continue de le faire... Quote
yoplait Posted November 3, 2012 at 04:33 PM Posted November 3, 2012 at 04:33 PM As-tu reçu un message d'erreur ? Est-ce que la commande "sudo dmesg" peut-être lancée et que tu puisses y voir une erreur quelconque ? Est-ce que ton disque dur va bien (pas complètement plein ?) ? et ta RAM ? peux-tu faire un memtest86+ (avec un liveCD) ? Ca arrive comment exactement ? Quote
grain Posted November 3, 2012 at 05:25 PM Posted November 3, 2012 at 05:25 PM Je ne reçois pas de message d'erreur, je peux faire différentes et ça arrive d'un coup sans prévenir, voire même sans lancer aucune tâche. Les disques durs ont encore pas mal d'espace libre, j'ai essayer d'enlever une partie de la RAM, mais le résultat est le même. Quote
grain Posted November 3, 2012 at 05:32 PM Posted November 3, 2012 at 05:32 PM Voici ce que donne le sudo mesg (je ne sais pas l'interpréter) : [ 0.292814] pci 0000:00:01.0: MEM window: 0xf8000000-0xf9ffffff [ 0.292821] pci 0000:00:01.0: PREFETCH window: 0xe8000000-0xf7ffffff [ 0.292831] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.292838] pci 0000:00:1e.0: IO window: 0xb000-0xbfff [ 0.292846] pci 0000:00:1e.0: MEM window: 0xfa000000-0xfa7fffff [ 0.292852] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.292876] pci 0000:00:1e.0: setting latency timer to 64 [ 0.292884] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.292890] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.292895] pci_bus 0000:01: resource 0 io: [0xa000-0xafff] [ 0.292901] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xf9ffffff] [ 0.292907] pci_bus 0000:01: resource 2 pref mem [0xe8000000-0xf7ffffff] [ 0.292913] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff] [ 0.292920] pci_bus 0000:02: resource 1 mem: [0xfa000000-0xfa7fffff] [ 0.292926] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.292932] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] [ 0.293000] NET: Registered protocol family 2 [ 0.293189] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.293817] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.294552] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.294872] TCP: Hash tables configured (established 131072 bind 65536) [ 0.294881] TCP reno registered [ 0.295111] NET: Registered protocol family 1 [ 0.295161] alloc irq_desc for 16 on node -1 [ 0.295166] alloc kstat_irqs on node -1 [ 0.295177] pci 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.295197] pci 0000:00:1d.0: PCI INT A disabled [ 0.295207] alloc irq_desc for 19 on node -1 [ 0.295211] alloc kstat_irqs on node -1 [ 0.295243] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.295262] pci 0000:00:1d.1: PCI INT B disabled [ 0.295274] alloc irq_desc for 18 on node -1 [ 0.295277] alloc kstat_irqs on node -1 [ 0.295285] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.295303] pci 0000:00:1d.2: PCI INT C disabled [ 0.295314] pci 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.295333] pci 0000:00:1d.3: PCI INT A disabled [ 0.295350] alloc irq_desc for 23 on node -1 [ 0.295354] alloc kstat_irqs on node -1 [ 0.295361] pci 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.295392] pci 0000:00:1d.7: PCI INT D disabled [ 0.295414] pci 0000:01:00.0: Boot video device [ 0.295626] cpufreq-nforce2: No nForce2 chipset. [ 0.295675] Scanning for low memory corruption every 60 seconds [ 0.295862] audit: initializing netlink socket (disabled) [ 0.295880] type=2000 audit(1351966730.295:1): initialized [ 0.307759] highmem bounce pool size: 64 pages [ 0.307769] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.311001] VFS: Disk quotas dquot_6.5.2 [ 0.311135] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.312376] fuse init (API version 7.13) [ 0.312566] msgmni has been set to 1690 [ 0.313013] alg: No test for stdrng (krng) [ 0.313150] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.313156] io scheduler noop registered [ 0.313160] io scheduler anticipatory registered [ 0.313164] io scheduler deadline registered [ 0.313247] io scheduler cfq registered (default) [ 0.313486] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.313534] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.313702] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.313709] ACPI: Power Button [PWRB] [ 0.313798] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.313809] ACPI: Sleep Button [sLPB] [ 0.313927] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.313933] ACPI: Power Button [PWRF] [ 0.314024] fan PNP0C0B:00: registered as cooling_device0 [ 0.314035] ACPI: Fan [FAN] (on) [ 0.314426] processor LNXCPU:00: registered as cooling_device1 [ 0.314516] processor LNXCPU:01: registered as cooling_device2 [ 0.318758] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.318776] ACPI: Thermal Zone [THRM] (40 C) [ 0.319054] isapnp: Scanning for PnP cards... [ 0.321526] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.321632] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.321744] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a XScale [ 0.322158] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.324102] brd: module loaded [ 0.325043] loop: module loaded [ 0.325231] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.325411] ata_piix 0000:00:1f.1: version 2.13 [ 0.325431] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.325489] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.325634] scsi0 : ata_piix [ 0.325789] scsi1 : ata_piix [ 0.327333] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.327340] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.328043] Fixed MDIO Bus: probed [ 0.328107] PPP generic driver version 2.4.2 [ 0.328190] tun: Universal TUN/TAP device driver, 1.6 [ 0.328194] tun: © 1999-2004 Max Krasnyansky [ 0.328353] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.328383] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.328404] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.328410] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.328477] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.332391] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported [ 0.332455] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfa800000 [ 0.347259] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.347452] usb usb1: configuration #1 chosen from 1 choice [ 0.347506] hub 1-0:1.0: USB hub found [ 0.347519] hub 1-0:1.0: 8 ports detected [ 0.347635] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.347666] uhci_hcd: USB Universal Host Controller Interface driver [ 0.347723] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.347737] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.347742] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.347804] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.347843] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000cc00 [ 0.347994] usb usb2: configuration #1 chosen from 1 choice [ 0.348039] hub 2-0:1.0: USB hub found [ 0.348052] hub 2-0:1.0: 2 ports detected [ 0.348123] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.348134] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.348139] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.348194] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.348227] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c000 [ 0.348375] usb usb3: configuration #1 chosen from 1 choice [ 0.348420] hub 3-0:1.0: USB hub found [ 0.348430] hub 3-0:1.0: 2 ports detected [ 0.348502] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.348512] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.348516] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.348581] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.348615] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c400 [ 0.348759] usb usb4: configuration #1 chosen from 1 choice [ 0.348804] hub 4-0:1.0: USB hub found [ 0.348820] hub 4-0:1.0: 2 ports detected [ 0.348892] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.348902] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.348906] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.348960] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.348984] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c800 [ 0.349136] usb usb5: configuration #1 chosen from 1 choice [ 0.349187] hub 5-0:1.0: USB hub found [ 0.349197] hub 5-0:1.0: 2 ports detected [ 0.349367] PNP: No PS/2 controller found. Probing ports directly. [ 0.356224] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.356239] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.356474] mice: PS/2 mouse device common for all mice [ 0.356691] rtc_cmos 00:03: RTC can wake from S4 [ 0.356756] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.356782] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.356974] device-mapper: uevent: version 1.0.3 [ 0.371452] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected] [ 0.423330] device-mapper: multipath: version 1.1.0 loaded [ 0.423336] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.458788] EISA: Probing bus 0 at eisa.0 [ 0.458831] EISA: Detected 0 cards. [ 0.489446] Freeing initrd memory: 7819k freed [ 0.496886] cpuidle: using governor ladder [ 0.496890] cpuidle: using governor menu [ 0.497663] TCP cubic registered [ 0.497913] NET: Registered protocol family 10 [ 0.499382] NET: Registered protocol family 17 [ 0.499466] Using IPI No-Shortcut mode [ 0.499616] PM: Resume from disk failed. [ 0.499634] registered taskstats version 1 [ 0.499977] Magic number: 4:436:341 [ 0.500072] rtc_cmos 00:03: setting system clock to 2012-11-03 18:18:51 UTC (1351966731) [ 0.500077] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.500080] EDD information not available. [ 0.503547] ata2.00: ATAPI: PIONEER DVD RW DVR-107D, 1.20, max UDMA/33 [ 0.503596] ata2.01: ATAPI: IDE DVD-ROM 16X, VER 7.92, max UDMA/33 [ 0.511438] ata2.00: configured for UDMA/33 [ 0.527424] ata2.01: configured for UDMA/33 [ 0.675962] isapnp: No Plug & Play device found [ 0.679722] ata1.00: ATA-6: ST3200021A, 3.01, max UDMA/100 [ 0.679726] ata1.00: 390721968 sectors, multi 16: LBA48 [ 0.681347] ata1.01: ATA-7: Maxtor 6L300R0, BAJ41G20, max UDMA/133 [ 0.681351] ata1.01: 586114704 sectors, multi 16: LBA48 [ 0.695753] ata1.00: configured for UDMA/100 [ 0.713111] ata1.01: configured for UDMA/100 [ 0.713256] scsi 0:0:0:0: Direct-Access ATA ST3200021A 3.01 PQ: 0 ANSI: 5 [ 0.713441] sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB) [ 0.713503] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.713538] sd 0:0:0:0: [sda] Write Protect is off [ 0.713544] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.713596] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.713707] scsi 0:0:1:0: Direct-Access ATA Maxtor 6L300R0 BAJ4 PQ: 0 ANSI: 5 [ 0.713913] sd 0:0:1:0: [sdb] 586114704 512-byte logical blocks: (300 GB/279 GiB) [ 0.713961] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 0.714018] sd 0:0:1:0: [sdb] Write Protect is off [ 0.714024] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 0.714082] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.714263] sda: [ 0.720642] scsi 1:0:0:0: CD-ROM PIONEER DVD RW DVR-107D 1.20 PQ: 0 ANSI: 5 [ 0.725636] sda1 sda2 < sda5 [ 0.733621] sdb:sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 0.739004] Uniform CD-ROM driver Revision: 3.20 [ 0.739146] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 0.739224] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 0.739549] scsi 1:0:1:0: CD-ROM IDE DVD-ROM 16X 7.92 PQ: 0 ANSI: 5 [ 0.741148] sr1: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray [ 0.741281] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 0.741353] sr 1:0:1:0: Attached scsi generic sg3 type 5 [ 0.752816] sda6 sda7 > [ 0.771281] usb 1-3: new high speed USB device using ehci_hcd and address 4 [ 0.776604] sdb1 < sdb5 > [ 0.792562] sd 0:0:1:0: [sdb] Attached SCSI disk [ 0.792602] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.792622] Freeing unused kernel memory: 664k freed [ 0.793245] Write protecting the kernel text: 4700k [ 0.793312] Write protecting the kernel read-only data: 1852k [ 0.821117] udev: starting version 151 [ 0.910853] usb 1-3: configuration #1 chosen from 1 choice [ 1.026209] Floppy drive(s): fd0 is 1.44M [ 1.051529] FDC 0 is a post-1991 82077 [ 1.098445] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 1.098454] via-rhine: Broken BIOS detected, avoid_D3 enabled. [ 1.098508] alloc irq_desc for 20 on node -1 [ 1.098512] alloc kstat_irqs on node -1 [ 1.098522] via-rhine 0000:02:09.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.105891] eth0: VIA Rhine III at 0xfa403000, 00:0c:76:a6:d0:ba, IRQ 20. [ 1.106606] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. [ 1.108734] Initializing USB Mass Storage driver... [ 1.109020] scsi2 : SCSI emulation for USB Mass Storage devices [ 1.109325] usbcore: registered new interface driver usb-storage [ 1.109330] USB Mass Storage support registered. [ 1.113835] alloc irq_desc for 21 on node -1 [ 1.113840] alloc kstat_irqs on node -1 [ 1.113852] ohci1394 0000:02:0a.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1.113899] usb-storage: device found at 4 [ 1.113904] usb-storage: waiting for device to settle before scanning [ 1.155313] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 1.169409] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21] MMIO=[fa404000-fa4047ff] Max Packet=[2048] IR/IT contexts=[8/8] [ 1.332900] usb 2-1: configuration #1 chosen from 1 choice [ 1.349713] usbcore: registered new interface driver hiddev [ 1.363044] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input4 [ 1.363259] generic-usb 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:1d.0-1/input0 [ 1.363314] usbcore: registered new interface driver usbhid [ 1.363321] usbhid: v2.6:USB HID core driver [ 1.478177] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 1.478184] EXT4-fs (sda1): write access will be enabled during recovery [ 1.572032] usb 2-2: new low speed USB device using uhci_hcd and address 3 [ 1.750845] usb 2-2: configuration #1 chosen from 1 choice [ 1.769099] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input5 [ 1.769276] generic-usb 0003:045E:0750.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:1d.0-2/input0 [ 1.799991] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input6 [ 1.800197] generic-usb 0003:045E:0750.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:1d.0-2/input1 [ 2.241101] EXT4-fs (sda1): recovery complete [ 2.241685] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 2.444241] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc000053417a] [ 6.108228] usb-storage: device scan complete [ 6.110071] scsi 2:0:0:0: Direct-Access Generic CF Card CF 1.4B PQ: 0 ANSI: 0 CCS [ 6.111812] scsi 2:0:0:1: Direct-Access Generic MS Card MS 1.4B PQ: 0 ANSI: 0 CCS [ 6.113567] scsi 2:0:0:2: Direct-Access Generic SD Card MMC/SD 1.4B PQ: 0 ANSI: 0 CCS [ 6.115437] scsi 2:0:0:3: Direct-Access Generic SM/XD Card SM 1.4B PQ: 0 ANSI: 0 CCS [ 6.116100] sd 2:0:0:0: Attached scsi generic sg4 type 0 [ 6.116334] sd 2:0:0:1: Attached scsi generic sg5 type 0 [ 6.116574] sd 2:0:0:2: Attached scsi generic sg6 type 0 [ 6.116809] sd 2:0:0:3: Attached scsi generic sg7 type 0 [ 6.120675] sd 2:0:0:0: [sdc] Attached SCSI removable disk [ 6.121547] sd 2:0:0:1: [sdd] Attached SCSI removable disk [ 6.122424] sd 2:0:0:2: [sde] Attached SCSI removable disk [ 6.123297] sd 2:0:0:3: [sdf] Attached SCSI removable disk [ 12.371674] udev: starting version 151 [ 12.428538] lp: driver loaded but no devices found [ 12.447453] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 12.464295] Adding 3998712k swap on /dev/sda6. Priority:-1 extents:1 across:3998712k [ 12.621204] Linux agpgart interface v0.103 [ 12.740396] agpgart-intel 0000:00:00.0: Intel 865 Chipset [ 12.752706] parport_pc 00:08: reported by Plug and Play ACPI [ 12.752775] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 12.834735] intel_rng: FWH not detected [ 12.835061] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe0000000 [ 12.845485] lp0: using parport0 (interrupt-driven). [ 12.961070] cfg80211: Calling CRDA to update world regulatory domain [ 13.026834] [drm] Initialized drm 1.1.0 20060810 [ 13.039988] ppdev: user-space parallel port driver [ 13.142152] Linux video capture interface: v2.00 [ 13.160669] cfg80211: World regulatory domain updated: [ 13.160676] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 13.160682] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.160687] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 13.160692] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 13.160697] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.160703] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.173583] p54pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 13.173647] p54pci 0000:02:00.0: firmware: requesting isl3886pci [ 13.215494] [drm] radeon defaulting to kernel modesetting. [ 13.215500] [drm] radeon kernel modesetting enabled. [ 13.215599] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 13.218142] [drm] radeon: Initializing kernel modesetting. [ 13.218269] [drm] register mmio base: 0xF9000000 [ 13.218273] [drm] register mmio size: 65536 [ 13.220274] [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [ 13.220299] [drm] Generation 1 PCI interface in multifunction mode [ 13.220303] [drm] Limiting VRAM to one aperture [ 13.220313] agpgart-intel 0000:00:00.0: AGP 3.0 bridge [ 13.220338] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode [ 13.220389] radeon 0000:01:00.0: putting AGP V3 device into 8x mode [ 13.220434] [drm] radeon: VRAM 128M [ 13.220438] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF [ 13.220441] [drm] radeon: GTT 128M [ 13.220445] [drm] radeon: GTT from 0xE0000000 to 0xE7FFFFFF [ 13.220470] [drm] radeon: irq initialized. [ 13.220628] [drm] Detected VRAM RAM=128M, BAR=128M [ 13.220634] [drm] RAM width 256bits DDR [ 13.221231] [TTM] Zone kernel: Available graphics memory: 436908 kiB. [ 13.221236] [TTM] Zone highmem: Available graphics memory: 1030800 kiB. [ 13.221259] [drm] radeon: 128M of VRAM memory ready [ 13.221263] [drm] radeon: 128M of GTT memory ready. [ 13.221509] [drm] radeon: 2 quad pipes, 1 Z pipes initialized. [ 13.221537] [drm] radeon: cp idle (0x10000C00) [ 13.221601] [drm] Loading R300 Microcode [ 13.221609] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [ 13.250339] saa7130/34: v4l2 driver version 0.2.15 loaded [ 13.253335] type=1505 audit(1351963144.251:2): operation="profile_load" pid=593 name="/sbin/dhclient3" [ 13.254035] type=1505 audit(1351963144.251:3): operation="profile_load" pid=593 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 13.254431] type=1505 audit(1351963144.251:4): operation="profile_load" pid=593 name="/usr/lib/connman/scripts/dhclient-script" [ 13.256837] type=1505 audit(1351963144.255:5): operation="profile_replace" pid=612 name="/sbin/dhclient3" [ 13.257588] type=1505 audit(1351963144.255:6): operation="profile_replace" pid=612 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 13.257984] type=1505 audit(1351963144.255:7): operation="profile_replace" pid=612 name="/usr/lib/connman/scripts/dhclient-script" [ 13.278182] [drm] radeon: ring at 0x00000000E0000000 [ 13.278207] [drm] ring test succeeded in 0 usecs [ 13.279619] p54pci 0000:02:00.0: Cannot find firmware (isl3886pci) [ 13.279674] p54pci 0000:02:00.0: firmware: requesting isl3886 [ 13.309831] [drm] radeon: ib pool ready. [ 13.309999] [drm] ib test succeeded in 0 usecs [ 13.311012] [drm] Default TV standard: PAL [ 13.311019] [drm] 27.000000000 MHz TV ref clk [ 13.311027] [drm] DFP table revision: 4 [ 13.311641] [drm] Default TV standard: PAL [ 13.311646] [drm] 27.000000000 MHz TV ref clk [ 13.311797] [drm] Radeon Display Connectors [ 13.311802] [drm] Connector 0: [ 13.311806] [drm] VGA [ 13.311810] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 13.311814] [drm] Encoders: [ 13.311817] [drm] CRT1: INTERNAL_DAC1 [ 13.311821] [drm] Connector 1: [ 13.311823] [drm] DVI-I [ 13.311826] [drm] HPD1 [ 13.311831] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 13.311835] [drm] Encoders: [ 13.311838] [drm] CRT2: INTERNAL_DAC2 [ 13.311841] [drm] DFP1: INTERNAL_TMDS1 [ 13.311845] [drm] Connector 2: [ 13.311848] [drm] S-video [ 13.311851] [drm] Encoders: [ 13.311854] [drm] TV1: INTERNAL_DAC2 [ 13.325360] p54pci 0000:02:00.0: PCI INT A disabled [ 13.325376] p54pci: probe of 0000:02:00.0 failed with error -2 [ 13.325444] saa7134 0000:02:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 13.325456] saa7134[0]: found at 0000:02:02.0, rev: 1, irq: 18, latency: 32, mmio: 0xfa402000 [ 13.325468] saa7134[0]: subsystem: 16be:0003, board: Medion 7134 [card=12,autodetected] [ 13.325488] saa7134[0]: board init: gpio is 0 [ 13.325502] IRQ 18/saa7134[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 13.525074] saa7134[0]: i2c eeprom 00: be 16 03 00 08 20 1c 55 43 43 a9 1c 55 43 43 a9 [ 13.525106] saa7134[0]: i2c eeprom 10: ff ff ff ff 15 00 0e 01 0c c0 08 00 00 00 00 00 [ 13.525133] saa7134[0]: i2c eeprom 20: 00 00 00 e3 ff ff ff ff ff ff ff ff ff ff ff ff [ 13.525161] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.525185] saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.525211] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.525240] saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.525268] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.525296] saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.525325] saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.525351] saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.525379] saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.525405] saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.525431] saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.525456] saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.525481] saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.525510] i2c i2c-2: Invalid 7-bit address 0x7a [ 13.541065] saa7134[0] Tuner type is 38 [ 13.573172] alloc irq_desc for 17 on node -1 [ 13.573177] alloc kstat_irqs on node -1 [ 13.573187] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 13.573221] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 13.615335] [drm] fb mappable at 0xE8040000 [ 13.615339] [drm] vram apper at 0xE8000000 [ 13.615341] [drm] size 5242880 [ 13.615344] [drm] fb depth is 24 [ 13.615346] [drm] pitch is 5120 [ 13.615481] fb0: radeondrmfb frame buffer device [ 13.615485] registered panic notifier [ 13.615496] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0 [ 13.619078] vga16fb: initializing [ 13.619139] vga16fb: mapped to 0xc00a0000 [ 13.619152] vga16fb: not registering due to another framebuffer present [ 13.688270] tuner 2-0043: chip found @ 0x86 (saa7134[0]) [ 13.715802] Console: switching to colour frame buffer device 160x64 [ 13.737490] tda9887 2-0043: creating new instance [ 13.737503] tda9887 2-0043: tda988[5/6/7] found [ 13.824069] All bytes are equal. It is not a TEA5767 [ 13.824288] tuner 2-0060: chip found @ 0xc0 (saa7134[0]) [ 13.859947] tuner-simple 2-0060: creating new instance [ 13.859954] tuner-simple 2-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) [ 13.897069] intel8x0_measure_ac97_clock: measured 54892 usecs (2645 samples) [ 13.897080] intel8x0: clocking to 48000 [ 13.952205] saa7134[0]: registered device video0 [v4l2] [ 13.952277] saa7134[0]: registered device vbi0 [ 13.952335] saa7134[0]: registered device radio0 [ 13.995185] saa7134 ALSA driver for DMA sound loaded [ 13.995209] IRQ 18/saa7134[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 13.995258] saa7134[0]/alsa: saa7134[0] at 0xfa402000 irq 18 registered as card -2 [ 14.012385] dvb_init() allocating 1 frontend [ 14.056464] EXT4-fs (sdb5): warning: maximal mount count reached, running e2fsck is recommended [ 14.070954] tda10046: chip is not answering. Giving up. [ 14.071295] saa7134[0]/dvb: frontend initialization failed [ 14.156491] EXT4-fs (sdb5): recovery complete [ 14.156505] EXT4-fs (sdb5): mounted filesystem with ordered data mode [ 15.403569] EXT4-fs (sda5): warning: maximal mount count reached, running e2fsck is recommended [ 15.441057] EXT4-fs (sda5): recovery complete [ 15.449647] EXT4-fs (sda5): mounted filesystem with ordered data mode [ 16.710815] EXT4-fs (sda7): mounted filesystem with ordered data mode [ 17.725572] eth0: link down [ 17.725830] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.780820] type=1505 audit(1351963148.779:: operation="profile_load" pid=1100 name="/usr/share/gdm/guest-session/Xsession" [ 17.783151] type=1505 audit(1351963148.779:9): operation="profile_replace" pid=1101 name="/sbin/dhclient3" [ 17.783834] type=1505 audit(1351963148.779:10): operation="profile_replace" pid=1101 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 17.784226] type=1505 audit(1351963148.783:11): operation="profile_replace" pid=1101 name="/usr/lib/connman/scripts/dhclient-script" [ 19.143357] CPU0 attaching NULL sched-domain. [ 19.143366] CPU1 attaching NULL sched-domain. [ 19.157136] CPU0 attaching sched-domain: [ 19.157148] domain 0: span 0-1 level SIBLING [ 19.157154] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 19.157168] domain 1: span 0-1 level MC [ 19.157173] groups: 0-1 (cpu_power = 1178) [ 19.157186] CPU1 attaching sched-domain: [ 19.157192] domain 0: span 0-1 level SIBLING [ 19.157197] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 19.157209] domain 1: span 0-1 level MC [ 19.157214] groups: 0-1 (cpu_power = 1178) [ 21.370587] CPU0 attaching NULL sched-domain. [ 21.370598] CPU1 attaching NULL sched-domain. [ 21.393220] CPU0 attaching sched-domain: [ 21.393228] domain 0: span 0-1 level SIBLING [ 21.393234] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 21.393247] domain 1: span 0-1 level MC [ 21.393253] groups: 0-1 (cpu_power = 1178) [ 21.393266] CPU1 attaching sched-domain: [ 21.393272] domain 0: span 0-1 level SIBLING [ 21.393277] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 21.393290] domain 1: span 0-1 level MC [ 21.393295] groups: 0-1 (cpu_power = 1178) Quote
yoplait Posted November 3, 2012 at 06:10 PM Posted November 3, 2012 at 06:10 PM Je vois rien de spécial... Va voir directement dans /var/log/messages, peut-être que tu y trouveras le moment juste avant la panne... Autre aide, tu peux tenter de faire un truc du genre : cat /var/log/messages | grep error (ça permet de chercher le mot "error" dans le fichier...) tente aussi "ERROR" ou même "warning" Tu as un livecd sous la main pour vraiment tester ta mémoire vive ? Et ta carte graphique, c'est quoi ? t'as mis quel pilote ? Ca le fait aussi si tu restes qu'en mode console (par exemple ctrl+alt+F1, puis, après s'être identifié : sudo /etc/init.d/gdm stop ) (c'est bien, c'est ici que je vais faire mes 20 postes tiens ... j'aurai l'air moins bête qu'en parlant de basse tiens !) Quote
grain Posted November 4, 2012 at 11:16 AM Posted November 4, 2012 at 11:16 AM On a tous nos petites spécialités (et Ubuntu ne fait pas vraiment partie des miennes... ). Je vais essayer de suivre tes conseils, dans la mesure de ce que je comprends. Voici le résultat quand je fais "cat /var/log/messages" Nov 4 11:58:48 Bubon kernel: [ 0.331102] ehci_hcd 0000:00:1d.7: EHCI Host Controller Nov 4 11:58:48 Bubon kernel: [ 0.331165] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 Nov 4 11:58:48 Bubon kernel: [ 0.335188] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfa800000 Nov 4 11:58:48 Bubon kernel: [ 0.363688] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Nov 4 11:58:48 Bubon kernel: [ 0.363880] usb usb1: configuration #1 chosen from 1 choice Nov 4 11:58:48 Bubon kernel: [ 0.363931] hub 1-0:1.0: USB hub found Nov 4 11:58:48 Bubon kernel: [ 0.363945] hub 1-0:1.0: 8 ports detected Nov 4 11:58:48 Bubon kernel: [ 0.364063] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Nov 4 11:58:48 Bubon kernel: [ 0.364093] uhci_hcd: USB Universal Host Controller Interface driver Nov 4 11:58:48 Bubon kernel: [ 0.364151] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Nov 4 11:58:48 Bubon kernel: [ 0.364170] uhci_hcd 0000:00:1d.0: UHCI Host Controller Nov 4 11:58:48 Bubon kernel: [ 0.364235] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 Nov 4 11:58:48 Bubon kernel: [ 0.364275] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000cc00 Nov 4 11:58:48 Bubon kernel: [ 0.364424] usb usb2: configuration #1 chosen from 1 choice Nov 4 11:58:48 Bubon kernel: [ 0.364470] hub 2-0:1.0: USB hub found Nov 4 11:58:48 Bubon kernel: [ 0.364480] hub 2-0:1.0: 2 ports detected Nov 4 11:58:48 Bubon kernel: [ 0.364557] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Nov 4 11:58:48 Bubon kernel: [ 0.364572] uhci_hcd 0000:00:1d.1: UHCI Host Controller Nov 4 11:58:48 Bubon kernel: [ 0.364625] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 Nov 4 11:58:48 Bubon kernel: [ 0.364658] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c000 Nov 4 11:58:48 Bubon kernel: [ 0.364803] usb usb3: configuration #1 chosen from 1 choice Nov 4 11:58:48 Bubon kernel: [ 0.364851] hub 3-0:1.0: USB hub found Nov 4 11:58:48 Bubon kernel: [ 0.364862] hub 3-0:1.0: 2 ports detected Nov 4 11:58:48 Bubon kernel: [ 0.364932] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Nov 4 11:58:48 Bubon kernel: [ 0.364947] uhci_hcd 0000:00:1d.2: UHCI Host Controller Nov 4 11:58:48 Bubon kernel: [ 0.365001] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 Nov 4 11:58:48 Bubon kernel: [ 0.365034] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c400 Nov 4 11:58:48 Bubon kernel: [ 0.365176] usb usb4: configuration #1 chosen from 1 choice Nov 4 11:58:48 Bubon kernel: [ 0.365225] hub 4-0:1.0: USB hub found Nov 4 11:58:48 Bubon kernel: [ 0.365235] hub 4-0:1.0: 2 ports detected Nov 4 11:58:48 Bubon kernel: [ 0.365306] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Nov 4 11:58:48 Bubon kernel: [ 0.365323] uhci_hcd 0000:00:1d.3: UHCI Host Controller Nov 4 11:58:48 Bubon kernel: [ 0.365377] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 Nov 4 11:58:48 Bubon kernel: [ 0.365402] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c800 Nov 4 11:58:48 Bubon kernel: [ 0.365556] usb usb5: configuration #1 chosen from 1 choice Nov 4 11:58:48 Bubon kernel: [ 0.365610] hub 5-0:1.0: USB hub found Nov 4 11:58:48 Bubon kernel: [ 0.365620] hub 5-0:1.0: 2 ports detected Nov 4 11:58:48 Bubon kernel: [ 0.365792] PNP: No PS/2 controller found. Probing ports directly. Nov 4 11:58:48 Bubon kernel: [ 0.368440] serio: i8042 KBD port at 0x60,0x64 irq 1 Nov 4 11:58:48 Bubon kernel: [ 0.368452] serio: i8042 AUX port at 0x60,0x64 irq 12 Nov 4 11:58:48 Bubon kernel: [ 0.368603] mice: PS/2 mouse device common for all mice Nov 4 11:58:48 Bubon kernel: [ 0.368796] rtc_cmos 00:03: RTC can wake from S4 Nov 4 11:58:48 Bubon kernel: [ 0.368860] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 Nov 4 11:58:48 Bubon kernel: [ 0.368886] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs Nov 4 11:58:48 Bubon kernel: [ 0.369075] device-mapper: uevent: version 1.0.3 Nov 4 11:58:48 Bubon kernel: [ 0.383414] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected] Nov 4 11:58:48 Bubon kernel: [ 0.480961] Freeing initrd memory: 7819k freed Nov 4 11:58:48 Bubon kernel: [ 0.486847] device-mapper: multipath: version 1.1.0 loaded Nov 4 11:58:48 Bubon kernel: [ 0.486852] device-mapper: multipath round-robin: version 1.0.0 loaded Nov 4 11:58:48 Bubon kernel: [ 0.487107] EISA: Probing bus 0 at eisa.0 Nov 4 11:58:48 Bubon kernel: [ 0.487151] EISA: Detected 0 cards. Nov 4 11:58:48 Bubon kernel: [ 0.487276] cpuidle: using governor ladder Nov 4 11:58:48 Bubon kernel: [ 0.487280] cpuidle: using governor menu Nov 4 11:58:48 Bubon kernel: [ 0.488059] TCP cubic registered Nov 4 11:58:48 Bubon kernel: [ 0.488294] NET: Registered protocol family 10 Nov 4 11:58:48 Bubon kernel: [ 0.489792] NET: Registered protocol family 17 Nov 4 11:58:48 Bubon kernel: [ 0.489871] Using IPI No-Shortcut mode Nov 4 11:58:48 Bubon kernel: [ 0.490035] registered taskstats version 1 Nov 4 11:58:48 Bubon kernel: [ 0.490381] Magic number: 4:937:983 Nov 4 11:58:48 Bubon kernel: [ 0.490474] rtc_cmos 00:03: setting system clock to 2012-11-04 11:58:34 UTC (1352030314) Nov 4 11:58:48 Bubon kernel: [ 0.490480] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found Nov 4 11:58:48 Bubon kernel: [ 0.490482] EDD information not available. Nov 4 11:58:48 Bubon kernel: [ 0.499951] ata2.00: ATAPI: PIONEER DVD RW DVR-107D, 1.20, max UDMA/33 Nov 4 11:58:48 Bubon kernel: [ 0.500000] ata2.01: ATAPI: IDE DVD-ROM 16X, VER 7.92, max UDMA/33 Nov 4 11:58:48 Bubon kernel: [ 0.507912] ata2.00: configured for UDMA/33 Nov 4 11:58:48 Bubon kernel: [ 0.563867] ata2.01: configured for UDMA/33 Nov 4 11:58:48 Bubon kernel: [ 0.676156] ata1.00: ATA-6: ST3200021A, 3.01, max UDMA/100 Nov 4 11:58:48 Bubon kernel: [ 0.676161] ata1.00: 390721968 sectors, multi 16: LBA48 Nov 4 11:58:48 Bubon kernel: [ 0.677797] ata1.01: ATA-7: Maxtor 6L300R0, BAJ41G20, max UDMA/133 Nov 4 11:58:48 Bubon kernel: [ 0.677802] ata1.01: 586114704 sectors, multi 16: LBA48 Nov 4 11:58:48 Bubon kernel: [ 0.687974] isapnp: No Plug & Play device found Nov 4 11:58:48 Bubon kernel: [ 0.692041] ata1.00: configured for UDMA/100 Nov 4 11:58:48 Bubon kernel: [ 0.709505] ata1.01: configured for UDMA/100 Nov 4 11:58:48 Bubon kernel: [ 0.709655] scsi 0:0:0:0: Direct-Access ATA ST3200021A 3.01 PQ: 0 ANSI: 5 Nov 4 11:58:48 Bubon kernel: [ 0.709848] sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB) Nov 4 11:58:48 Bubon kernel: [ 0.709909] sd 0:0:0:0: Attached scsi generic sg0 type 0 Nov 4 11:58:48 Bubon kernel: [ 0.709947] sd 0:0:0:0: [sda] Write Protect is off Nov 4 11:58:48 Bubon kernel: [ 0.710005] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Nov 4 11:58:48 Bubon kernel: [ 0.710121] scsi 0:0:1:0: Direct-Access ATA Maxtor 6L300R0 BAJ4 PQ: 0 ANSI: 5 Nov 4 11:58:48 Bubon kernel: [ 0.710285] sda: Nov 4 11:58:48 Bubon kernel: [ 0.710378] sd 0:0:1:0: Attached scsi generic sg1 type 0 Nov 4 11:58:48 Bubon kernel: [ 0.716338] sd 0:0:1:0: [sdb] 586114704 512-byte logical blocks: (300 GB/279 GiB) Nov 4 11:58:48 Bubon kernel: [ 0.716346] sda1 sda2 < Nov 4 11:58:48 Bubon kernel: [ 0.716542] scsi 1:0:0:0: CD-ROM PIONEER DVD RW DVR-107D 1.20 PQ: 0 ANSI: 5 Nov 4 11:58:48 Bubon kernel: [ 0.724245] sda5sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Nov 4 11:58:48 Bubon kernel: [ 0.734899] Uniform CD-ROM driver Revision: 3.20 Nov 4 11:58:48 Bubon kernel: [ 0.735128] sr 1:0:0:0: Attached scsi generic sg2 type 5 Nov 4 11:58:48 Bubon kernel: [ 0.735442] scsi 1:0:1:0: CD-ROM IDE DVD-ROM 16X 7.92 PQ: 0 ANSI: 5 Nov 4 11:58:48 Bubon kernel: [ 0.737040] sr1: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray Nov 4 11:58:48 Bubon kernel: [ 0.737254] sr 1:0:1:0: Attached scsi generic sg3 type 5 Nov 4 11:58:48 Bubon kernel: [ 0.743492] sd 0:0:1:0: [sdb] Write Protect is off Nov 4 11:58:48 Bubon kernel: [ 0.743496] sda6 Nov 4 11:58:48 Bubon kernel: [ 0.743504] sda7 > Nov 4 11:58:48 Bubon kernel: [ 0.743586] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Nov 4 11:58:48 Bubon kernel: [ 0.744063] sdb: sdb1 < sdb5 > Nov 4 11:58:48 Bubon kernel: [ 0.777208] sd 0:0:1:0: [sdb] Attached SCSI disk Nov 4 11:58:48 Bubon kernel: [ 0.777213] sd 0:0:0:0: [sda] Attached SCSI disk Nov 4 11:58:48 Bubon kernel: [ 0.777236] Freeing unused kernel memory: 664k freed Nov 4 11:58:48 Bubon kernel: [ 0.777821] Write protecting the kernel text: 4700k Nov 4 11:58:48 Bubon kernel: [ 0.777892] Write protecting the kernel read-only data: 1852k Nov 4 11:58:48 Bubon kernel: [ 0.787776] usb 1-3: new high speed USB device using ehci_hcd and address 4 Nov 4 11:58:48 Bubon kernel: [ 0.806007] udev: starting version 151 Nov 4 11:58:48 Bubon kernel: [ 0.922950] usb 1-3: configuration #1 chosen from 1 choice Nov 4 11:58:48 Bubon kernel: [ 1.019099] Floppy drive(s): fd0 is 1.44M Nov 4 11:58:48 Bubon kernel: [ 1.040743] FDC 0 is a post-1991 82077 Nov 4 11:58:48 Bubon kernel: [ 1.062637] Initializing USB Mass Storage driver... Nov 4 11:58:48 Bubon kernel: [ 1.065443] scsi2 : SCSI emulation for USB Mass Storage devices Nov 4 11:58:48 Bubon kernel: [ 1.065608] usbcore: registered new interface driver usb-storage Nov 4 11:58:48 Bubon kernel: [ 1.065613] USB Mass Storage support registered. Nov 4 11:58:48 Bubon kernel: [ 1.073275] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker Nov 4 11:58:48 Bubon kernel: [ 1.073284] via-rhine: Broken BIOS detected, avoid_D3 enabled. Nov 4 11:58:48 Bubon kernel: [ 1.073359] via-rhine 0000:02:09.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 Nov 4 11:58:48 Bubon kernel: [ 1.082083] eth0: VIA Rhine III at 0xfa403000, 00:0c:76:a6:d0:ba, IRQ 20. Nov 4 11:58:48 Bubon kernel: [ 1.082798] eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 41e1. Nov 4 11:58:48 Bubon kernel: [ 1.100080] ohci1394 0000:02:0a.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 Nov 4 11:58:48 Bubon kernel: [ 1.157846] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21] MMIO=[fa404000-fa4047ff] Max Packet=[2048] IR/IT contexts=[8/8] Nov 4 11:58:48 Bubon kernel: [ 1.163736] usb 2-1: new low speed USB device using uhci_hcd and address 2 Nov 4 11:58:48 Bubon kernel: [ 1.344329] usb 2-1: configuration #1 chosen from 1 choice Nov 4 11:58:48 Bubon kernel: [ 1.361726] usbcore: registered new interface driver hiddev Nov 4 11:58:48 Bubon kernel: [ 1.374465] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input4 Nov 4 11:58:48 Bubon kernel: [ 1.374683] generic-usb 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:1d.0-1/input0 Nov 4 11:58:48 Bubon kernel: [ 1.374747] usbcore: registered new interface driver usbhid Nov 4 11:58:48 Bubon kernel: [ 1.374755] usbhid: v2.6:USB HID core driver Nov 4 11:58:48 Bubon kernel: [ 1.458663] EXT4-fs (sda1): mounted filesystem with ordered data mode Nov 4 11:58:48 Bubon kernel: [ 1.585032] usb 2-2: new low speed USB device using uhci_hcd and address 3 Nov 4 11:58:48 Bubon kernel: [ 1.762257] usb 2-2: configuration #1 chosen from 1 choice Nov 4 11:58:48 Bubon kernel: [ 1.780493] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input5 Nov 4 11:58:48 Bubon kernel: [ 1.780604] generic-usb 0003:045E:0750.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:1d.0-2/input0 Nov 4 11:58:48 Bubon kernel: [ 1.811391] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input6 Nov 4 11:58:48 Bubon kernel: [ 1.811506] generic-usb 0003:045E:0750.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:1d.0-2/input1 Nov 4 11:58:48 Bubon kernel: [ 6.066262] scsi 2:0:0:0: Direct-Access Generic CF Card CF 1.4B PQ: 0 ANSI: 0 CCS Nov 4 11:58:48 Bubon kernel: [ 6.068130] scsi 2:0:0:1: Direct-Access Generic MS Card MS 1.4B PQ: 0 ANSI: 0 CCS Nov 4 11:58:48 Bubon kernel: [ 6.070003] scsi 2:0:0:2: Direct-Access Generic SD Card MMC/SD 1.4B PQ: 0 ANSI: 0 CCS Nov 4 11:58:48 Bubon kernel: [ 6.071751] scsi 2:0:0:3: Direct-Access Generic SM/XD Card SM 1.4B PQ: 0 ANSI: 0 CCS Nov 4 11:58:48 Bubon kernel: [ 6.072429] sd 2:0:0:0: Attached scsi generic sg4 type 0 Nov 4 11:58:48 Bubon kernel: [ 6.072674] sd 2:0:0:1: Attached scsi generic sg5 type 0 Nov 4 11:58:48 Bubon kernel: [ 6.072927] sd 2:0:0:2: Attached scsi generic sg6 type 0 Nov 4 11:58:48 Bubon kernel: [ 6.073193] sd 2:0:0:3: Attached scsi generic sg7 type 0 Nov 4 11:58:48 Bubon kernel: [ 6.077036] sd 2:0:0:0: [sdc] Attached SCSI removable disk Nov 4 11:58:48 Bubon kernel: [ 6.077880] sd 2:0:0:1: [sdd] Attached SCSI removable disk Nov 4 11:58:48 Bubon kernel: [ 6.078740] sd 2:0:0:2: [sde] Attached SCSI removable disk Nov 4 11:58:48 Bubon kernel: [ 6.079614] sd 2:0:0:3: [sdf] Attached SCSI removable disk Nov 4 11:58:48 Bubon kernel: [ 11.537533] udev: starting version 151 Nov 4 11:58:48 Bubon kernel: [ 11.616531] Adding 3998712k swap on /dev/sda6. Priority:-1 extents:1 across:3998712k Nov 4 11:58:48 Bubon kernel: [ 11.653962] lp: driver loaded but no devices found Nov 4 11:58:48 Bubon kernel: [ 11.739853] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Nov 4 11:58:48 Bubon kernel: [ 11.742402] Linux agpgart interface v0.103 Nov 4 11:58:48 Bubon kernel: [ 11.822727] agpgart-intel 0000:00:00.0: Intel 865 Chipset Nov 4 11:58:48 Bubon kernel: [ 11.844132] intel_rng: FWH not detected Nov 4 11:58:48 Bubon kernel: [ 11.906524] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe0000000 Nov 4 11:58:48 Bubon kernel: [ 12.094625] cfg80211: Calling CRDA to update world regulatory domain Nov 4 11:58:48 Bubon kernel: [ 12.190319] cfg80211: World regulatory domain updated: Nov 4 11:58:48 Bubon kernel: [ 12.190326] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Nov 4 11:58:48 Bubon kernel: [ 12.190332] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Nov 4 11:58:48 Bubon kernel: [ 12.190337] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Nov 4 11:58:48 Bubon kernel: [ 12.190343] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Nov 4 11:58:48 Bubon kernel: [ 12.190348] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Nov 4 11:58:48 Bubon kernel: [ 12.190354] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Nov 4 11:58:48 Bubon kernel: [ 12.210844] [drm] Initialized drm 1.1.0 20060810 Nov 4 11:58:48 Bubon kernel: [ 12.226470] parport_pc 00:08: reported by Plug and Play ACPI Nov 4 11:58:48 Bubon kernel: [ 12.226524] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] Nov 4 11:58:48 Bubon kernel: [ 12.324401] lp0: using parport0 (interrupt-driven). Nov 4 11:58:48 Bubon kernel: [ 12.335280] ppdev: user-space parallel port driver Nov 4 11:58:48 Bubon kernel: [ 12.379096] Linux video capture interface: v2.00 Nov 4 11:58:48 Bubon kernel: [ 12.387233] type=1505 audit(1352026726.393:2): operation="profile_load" pid=626 name="/sbin/dhclient3" Nov 4 11:58:48 Bubon kernel: [ 12.387961] type=1505 audit(1352026726.393:3): operation="profile_load" pid=626 name="/usr/lib/NetworkManager/nm-dhcp-client.action" Nov 4 11:58:48 Bubon kernel: [ 12.392332] type=1505 audit(1352026726.401:4): operation="profile_load" pid=626 name="/usr/lib/connman/scripts/dhclient-script" Nov 4 11:58:48 Bubon kernel: [ 12.408426] type=1505 audit(1352026726.417:5): operation="profile_replace" pid=638 name="/sbin/dhclient3" Nov 4 11:58:48 Bubon kernel: [ 12.418895] type=1505 audit(1352026726.425:6): operation="profile_replace" pid=638 name="/usr/lib/NetworkManager/nm-dhcp-client.action" Nov 4 11:58:48 Bubon kernel: [ 12.419305] type=1505 audit(1352026726.425:7): operation="profile_replace" pid=638 name="/usr/lib/connman/scripts/dhclient-script" Nov 4 11:58:48 Bubon kernel: [ 12.466153] [drm] radeon defaulting to kernel modesetting. Nov 4 11:58:48 Bubon kernel: [ 12.466160] [drm] radeon kernel modesetting enabled. Nov 4 11:58:48 Bubon kernel: [ 12.466237] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Nov 4 11:58:48 Bubon kernel: [ 12.468722] [drm] radeon: Initializing kernel modesetting. Nov 4 11:58:48 Bubon kernel: [ 12.473386] p54pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Nov 4 11:58:48 Bubon kernel: [ 12.473457] p54pci 0000:02:00.0: firmware: requesting isl3886pci Nov 4 11:58:48 Bubon kernel: [ 12.473993] [drm] register mmio base: 0xF9000000 Nov 4 11:58:48 Bubon kernel: [ 12.473998] [drm] register mmio size: 65536 Nov 4 11:58:48 Bubon kernel: [ 12.475930] [drm] GPU reset succeed (RBBM_STATUS=0x00000140) Nov 4 11:58:48 Bubon kernel: [ 12.475959] [drm] Generation 1 PCI interface in multifunction mode Nov 4 11:58:48 Bubon kernel: [ 12.475963] [drm] Limiting VRAM to one aperture Nov 4 11:58:48 Bubon kernel: [ 12.475973] agpgart-intel 0000:00:00.0: AGP 3.0 bridge Nov 4 11:58:48 Bubon kernel: [ 12.475998] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode Nov 4 11:58:48 Bubon kernel: [ 12.476053] radeon 0000:01:00.0: putting AGP V3 device into 8x mode Nov 4 11:58:48 Bubon kernel: [ 12.476727] [drm] radeon: VRAM 128M Nov 4 11:58:48 Bubon kernel: [ 12.476733] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF Nov 4 11:58:48 Bubon kernel: [ 12.476737] [drm] radeon: GTT 128M Nov 4 11:58:48 Bubon kernel: [ 12.476740] [drm] radeon: GTT from 0xE0000000 to 0xE7FFFFFF Nov 4 11:58:48 Bubon kernel: [ 12.476789] [drm] radeon: irq initialized. Nov 4 11:58:48 Bubon kernel: [ 12.476959] [drm] Detected VRAM RAM=128M, BAR=128M Nov 4 11:58:48 Bubon kernel: [ 12.476965] [drm] RAM width 256bits DDR Nov 4 11:58:48 Bubon kernel: [ 12.485672] [TTM] Zone kernel: Available graphics memory: 433580 kiB. Nov 4 11:58:48 Bubon kernel: [ 12.485680] [TTM] Zone highmem: Available graphics memory: 1289616 kiB. Nov 4 11:58:48 Bubon kernel: [ 12.485717] [drm] radeon: 128M of VRAM memory ready Nov 4 11:58:48 Bubon kernel: [ 12.485723] [drm] radeon: 128M of GTT memory ready. Nov 4 11:58:48 Bubon kernel: [ 12.485973] [drm] radeon: 2 quad pipes, 1 Z pipes initialized. Nov 4 11:58:48 Bubon kernel: [ 12.485994] [drm] radeon: cp idle (0x10000C00) Nov 4 11:58:48 Bubon kernel: [ 12.486087] [drm] Loading R300 Microcode Nov 4 11:58:48 Bubon kernel: [ 12.486095] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin Nov 4 11:58:48 Bubon kernel: [ 12.529686] p54pci 0000:02:00.0: firmware: requesting isl3886 Nov 4 11:58:48 Bubon kernel: [ 12.538154] [drm] radeon: ring at 0x00000000E0000000 Nov 4 11:58:48 Bubon kernel: [ 12.538181] [drm] ring test succeeded in 0 usecs Nov 4 11:58:48 Bubon kernel: [ 12.554012] p54pci 0000:02:00.0: PCI INT A disabled Nov 4 11:58:48 Bubon kernel: [ 12.554027] p54pci: probe of 0000:02:00.0 failed with error -2 Nov 4 11:58:48 Bubon kernel: [ 12.555372] [drm] radeon: ib pool ready. Nov 4 11:58:48 Bubon kernel: [ 12.555536] [drm] ib test succeeded in 0 usecs Nov 4 11:58:48 Bubon kernel: [ 12.557188] [drm] Default TV standard: PAL Nov 4 11:58:48 Bubon kernel: [ 12.557196] [drm] 27.000000000 MHz TV ref clk Nov 4 11:58:48 Bubon kernel: [ 12.557204] [drm] DFP table revision: 4 Nov 4 11:58:48 Bubon kernel: [ 12.560061] [drm] Default TV standard: PAL Nov 4 11:58:48 Bubon kernel: [ 12.560068] [drm] 27.000000000 MHz TV ref clk Nov 4 11:58:48 Bubon kernel: [ 12.560380] [drm] Radeon Display Connectors Nov 4 11:58:48 Bubon kernel: [ 12.560386] [drm] Connector 0: Nov 4 11:58:48 Bubon kernel: [ 12.560390] [drm] VGA Nov 4 11:58:48 Bubon kernel: [ 12.560395] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 Nov 4 11:58:48 Bubon kernel: [ 12.560399] [drm] Encoders: Nov 4 11:58:48 Bubon kernel: [ 12.560402] [drm] CRT1: INTERNAL_DAC1 Nov 4 11:58:48 Bubon kernel: [ 12.560406] [drm] Connector 1: Nov 4 11:58:48 Bubon kernel: [ 12.560409] [drm] DVI-I Nov 4 11:58:48 Bubon kernel: [ 12.560412] [drm] HPD1 Nov 4 11:58:48 Bubon kernel: [ 12.560416] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 Nov 4 11:58:48 Bubon kernel: [ 12.560420] [drm] Encoders: Nov 4 11:58:48 Bubon kernel: [ 12.560423] [drm] CRT2: INTERNAL_DAC2 Nov 4 11:58:48 Bubon kernel: [ 12.560426] [drm] DFP1: INTERNAL_TMDS1 Nov 4 11:58:48 Bubon kernel: [ 12.560430] [drm] Connector 2: Nov 4 11:58:48 Bubon kernel: [ 12.560433] [drm] S-video Nov 4 11:58:48 Bubon kernel: [ 12.560436] [drm] Encoders: Nov 4 11:58:48 Bubon kernel: [ 12.560439] [drm] TV1: INTERNAL_DAC2 Nov 4 11:58:48 Bubon kernel: [ 12.570173] saa7130/34: v4l2 driver version 0.2.15 loaded Nov 4 11:58:48 Bubon kernel: [ 12.570261] saa7134 0000:02:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Nov 4 11:58:48 Bubon kernel: [ 12.570273] saa7134[0]: found at 0000:02:02.0, rev: 1, irq: 18, latency: 32, mmio: 0xfa402000 Nov 4 11:58:48 Bubon kernel: [ 12.570285] saa7134[0]: subsystem: 16be:0003, board: Medion 7134 [card=12,autodetected] Nov 4 11:58:48 Bubon kernel: [ 12.570314] saa7134[0]: board init: gpio is 0 Nov 4 11:58:48 Bubon kernel: [ 12.570330] IRQ 18/saa7134[0]: IRQF_DISABLED is not guaranteed on shared IRQs Nov 4 11:58:48 Bubon kernel: [ 12.719159] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Nov 4 11:58:48 Bubon kernel: [ 12.725112] saa7134[0]: i2c eeprom 00: be 16 03 00 08 20 1c 55 43 43 a9 1c 55 43 43 a9 Nov 4 11:58:48 Bubon kernel: [ 12.725232] saa7134[0]: i2c eeprom 10: ff ff ff ff 15 00 0e 01 0c c0 08 00 00 00 00 00 Nov 4 11:58:48 Bubon kernel: [ 12.725346] saa7134[0]: i2c eeprom 20: 00 00 00 e3 ff ff ff ff ff ff ff ff ff ff ff ff Nov 4 11:58:48 Bubon kernel: [ 12.725456] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Nov 4 11:58:48 Bubon kernel: [ 12.725584] saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Nov 4 11:58:48 Bubon kernel: [ 12.725700] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Nov 4 11:58:48 Bubon kernel: [ 12.725816] saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Nov 4 11:58:48 Bubon kernel: [ 12.725930] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Nov 4 11:58:48 Bubon kernel: [ 12.726045] saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Nov 4 11:58:48 Bubon kernel: [ 12.726171] saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Nov 4 11:58:48 Bubon kernel: [ 12.726286] saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Nov 4 11:58:48 Bubon kernel: [ 12.726395] saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Nov 4 11:58:48 Bubon kernel: [ 12.726514] saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Nov 4 11:58:48 Bubon kernel: [ 12.726634] saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Nov 4 11:58:48 Bubon kernel: [ 12.726745] saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Nov 4 11:58:48 Bubon kernel: [ 12.726859] saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Nov 4 11:58:48 Bubon kernel: [ 12.726969] i2c i2c-2: Invalid 7-bit address 0x7a Nov 4 11:58:48 Bubon kernel: [ 12.737908] [drm] fb mappable at 0xE8040000 Nov 4 11:58:48 Bubon kernel: [ 12.737912] [drm] vram apper at 0xE8000000 Nov 4 11:58:48 Bubon kernel: [ 12.737915] [drm] size 5242880 Nov 4 11:58:48 Bubon kernel: [ 12.737918] [drm] fb depth is 24 Nov 4 11:58:48 Bubon kernel: [ 12.737921] [drm] pitch is 5120 Nov 4 11:58:48 Bubon kernel: [ 12.738092] fb0: radeondrmfb frame buffer device Nov 4 11:58:48 Bubon kernel: [ 12.738097] registered panic notifier Nov 4 11:58:48 Bubon kernel: [ 12.738107] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0 Nov 4 11:58:48 Bubon kernel: [ 12.741690] vga16fb: mapped to 0xc00a0000 Nov 4 11:58:48 Bubon kernel: [ 12.741697] vga16fb: not registering due to another framebuffer present Nov 4 11:58:48 Bubon kernel: [ 12.745058] saa7134[0] Tuner type is 38 Nov 4 11:58:48 Bubon kernel: [ 12.838251] Console: switching to colour frame buffer device 160x64 Nov 4 11:58:48 Bubon kernel: [ 12.888250] tuner 2-0043: chip found @ 0x86 (saa7134[0]) Nov 4 11:58:48 Bubon kernel: [ 12.911867] tda9887 2-0043: creating new instance Nov 4 11:58:48 Bubon kernel: [ 12.911873] tda9887 2-0043: tda988[5/6/7] found Nov 4 11:58:48 Bubon kernel: [ 12.956021] All bytes are equal. It is not a TEA5767 Nov 4 11:58:48 Bubon kernel: [ 12.956150] tuner 2-0060: chip found @ 0xc0 (saa7134[0]) Nov 4 11:58:48 Bubon kernel: [ 12.972034] tuner-simple 2-0060: creating new instance Nov 4 11:58:48 Bubon kernel: [ 12.972040] tuner-simple 2-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) Nov 4 11:58:48 Bubon kernel: [ 13.037133] saa7134[0]: registered device video0 [v4l2] Nov 4 11:58:48 Bubon kernel: [ 13.037205] saa7134[0]: registered device vbi0 Nov 4 11:58:48 Bubon kernel: [ 13.037300] saa7134[0]: registered device radio0 Nov 4 11:58:48 Bubon kernel: [ 13.041658] intel8x0_measure_ac97_clock: measured 55314 usecs (2665 samples) Nov 4 11:58:48 Bubon kernel: [ 13.041664] intel8x0: clocking to 48000 Nov 4 11:58:48 Bubon kernel: [ 13.061346] saa7134 ALSA driver for DMA sound loaded Nov 4 11:58:48 Bubon kernel: [ 13.061365] IRQ 18/saa7134[0]: IRQF_DISABLED is not guaranteed on shared IRQs Nov 4 11:58:48 Bubon kernel: [ 13.061413] saa7134[0]/alsa: saa7134[0] at 0xfa402000 irq 18 registered as card -2 Nov 4 11:58:48 Bubon kernel: [ 13.173561] dvb_init() allocating 1 frontend Nov 4 11:58:48 Bubon kernel: [ 13.322952] EXT4-fs (sdb5): warning: maximal mount count reached, running e2fsck is recommended Nov 4 11:58:48 Bubon kernel: [ 13.379429] EXT4-fs (sdb5): mounted filesystem with ordered data mode Nov 4 11:58:48 Bubon kernel: [ 13.526685] EXT4-fs (sda5): warning: maximal mount count reached, running e2fsck is recommended Nov 4 11:58:48 Bubon kernel: [ 13.531679] EXT4-fs (sda5): mounted filesystem with ordered data mode Nov 4 11:58:48 Bubon kernel: [ 13.619611] EXT4-fs (sda7): mounted filesystem with ordered data mode Nov 4 11:58:48 Bubon kernel: [ 14.672040] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 Nov 4 11:58:48 Bubon kernel: [ 14.728733] type=1505 audit(1352026728.737:: operation="profile_replace" pid=1083 name="/sbin/dhclient3" Nov 4 11:58:48 Bubon kernel: [ 14.729470] type=1505 audit(1352026728.737:9): operation="profile_replace" pid=1083 name="/usr/lib/NetworkManager/nm-dhcp-client.action" Nov 4 11:58:48 Bubon kernel: [ 14.729857] type=1505 audit(1352026728.737:10): operation="profile_replace" pid=1083 name="/usr/lib/connman/scripts/dhclient-script" Nov 4 11:58:48 Bubon kernel: [ 14.732056] type=1505 audit(1352026728.741:11): operation="profile_load" pid=1081 name="/usr/share/gdm/guest-session/Xsession" Nov 4 11:58:49 Bubon pulseaudio[1331]: lock-autospawn.c: Cannot access autospawn lock. Pour la carte graphique et son driver, je ne sais pas te répondre (la carte est une radeon, mais aucune idée du driver utilisé). Quote
grain Posted November 4, 2012 at 02:25 PM Posted November 4, 2012 at 02:25 PM Bon, je viens d'essayer plusieurs fois de vérifier la RAM à partir du LiveCD, mais l'ordi m'a refait le coup de se couper à chaque fois (pas d'écran noir mais le chronomètre de la vérification s'arrête et le pourcentage de vérification n'avance plus alors que l'animation de Memtest - un petit + qui clignote - continue de clignoter). Ca l'a fait à différent moment de la vérification (une fois à 50% et une autre fois à 62%) et Memtest n'a pas l'air de trouver d'erreurs, mais l'ordinateur ne reste jamais plus d'une demi-heure sans planter... Quote
grain Posted November 8, 2012 at 04:12 PM Posted November 8, 2012 at 04:12 PM (edited) J'ai essayé plusieurs fois depuis de tester la mémoire, mais comme les premières fois, l'ordi bugue avant d'arriver à la fin du test. Des idées de ce que ça pourrait être ? La carte mère qui fatigue (l'ordi a plus de 7 ans d'âge...) ? Edited November 8, 2012 at 04:18 PM by grain Quote
yoplait Posted November 8, 2012 at 05:33 PM Posted November 8, 2012 at 05:33 PM Si c'est par livecd, ça sent la carte graphique, voire la carte mère... Tu as une autre sortie pour ton écran (sur un autre carte)? Faudrait tester avec. Si c'est par livecd, ça sent la carte graphique, voire la carte mère... Tu as une autre sortie pour ton écran (sur un autre carte)? Faudrait tester avec. Quote
grain Posted November 8, 2012 at 09:03 PM Posted November 8, 2012 at 09:03 PM Non, je n'ai pas d'autre sortie pour l'écran, mais quoi que je fasse ça bugue à un moment ou à un autre. Je suis en train de me faire une raison... Quote
xrayromeo Posted November 8, 2012 at 09:11 PM Posted November 8, 2012 at 09:11 PM Voici quelques petites choses faciles à faire : - Mettre hors tension le PC (débrancher la prise) - Dépoussierer l'intérieur (carte mère, ...) de l'ordinateur avec une bombe à air sec (ou avec un petit aspirateur en faisant attention de ne rien toucher). - Vérifier délicatement la bonne connexion des barettes mémoires et carte graphique sur la carte mère. Ne pas toucher les composants directement (electricité statique). - Vérifier l'état des condensateurs de la carte mère (ils peuvent gonfler et parfois même fuir => ko). - Refaire le memtest avec le live cd. Quote
wills91 Posted November 9, 2012 at 01:01 AM Posted November 9, 2012 at 01:01 AM quoi que je fasse ça bugue à un moment ou à un autre. Je suis en train de me faire une raison... Si ta carte graphique est une RADEON, peu importe la marque, tu es sur un chipset ATI. Faut savoir que ATI, contrairement à N'Vidia, documentait très mal ses processeurs graphiques (Je parle au passé car je ne sait pas si c'est toujours le cas, j'ai arrêté ATI depuis un moment) Du coup il n'était est pas évident pour la communauté des dev linux de pondre et de faire évoluer des pilotes qui tiennent vraiment la route pour cette marque, d'autant que les chipsets évoluent tous les 6 mois. Si ton PC a 7 ans, les radeon de cette époque sont pile poile dans la génération de cartes graphiques ATI qui m'ont le plus fais ch... L'idéal serait de pouvoir essayer de brancher une carte graphique a base de chipset N'Vidia (Au pire ton informatitien du coin , s'il est sympa, t'en dégottera une d'occas qui sera au moins aussi bien pour 10 € maxi). A mon avis ça va résoudre ton problème comme par magie. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.