Ollie Posted January 10, 2013 at 03:17 PM Share Posted January 10, 2013 at 03:17 PM (edited) Si quelqu'un peut aider .Je viens de recevoir une wha dunlop 105Q (la blanche) .Très content du son mais voilà . A volume éteint sur la basse ... Je capte la radio qui sort évidement par les hp ... Si j'utilise la wha évident c'est le signal de la radio qui whawhatte :-)Des que je remets le volume sur la basse ... Je n'ai plus le problème ...Des idées ? Edited January 10, 2013 at 03:24 PM by Ollie Quote Link to comment Share on other sites More sharing options...
glen Posted January 10, 2013 at 03:25 PM Share Posted January 10, 2013 at 03:25 PM T'as un probleme avec un produit pourquoi tu vas pas voir le site du constructeur de ce produit d'abord? regarde, c'est sur la page du produit sur leur site: Q: Why do I hear radio stations through my wah pedal? A: This is a common occurrence because the inductor in the Wah pedal acts as an antenna. When you are in an area with a lot of radio frequency, the pedal can and will pick up radio stations. It is not very easy to troubleshoot and fix, because it differs so greatly due to the different signals and the varying surroundings. What may work in one region might not work in another. The first step in troubleshooting is to find out where in your rig the signal is coming from. -First check to see if it is coming in through the AC Adapter. Use the effect with a battery and see if it is coming in through the wall. If it is, discontinue the use of the AC Adapter. If this doesn't work, then... -Second, check to see if it is coming in through the guitar. Turn the volume of the guitar down to zero and see if you still get the radio signal. If yes, you might want to try putting a .0068-microfarad capacitor on the input jack between the tip and the shaft. (The capacitor can be a ceramic or polyester type and voltage rating of any size works.) This will also kill the high end of your sound. If this doesn't work, then... -Third, check the inductor. If you have a metal inductor, you can purchase a shield from us and place it over the inductor with a ground wire that is placed under one of the screws on the PC Board. This acts as both an AC Hum and RF shield. (It is part number ECB99 - and lists for $12.00) If this doesn't work then... -Fourth, open up the pedal and unsolder the black wire from the pot. Slide some Ferrite beads onto the wire and re-solder it. The size, number and shape of the beads depends upon the signal that you are getting, and we have not found any rhyme or reason as to which beads work with which signals. If this doesn't work then... -Fifth, wrap the entire wire harness in Mumetal foil, which comes in a tape format, and hope that that works, because after that who knows! Getting radio stations on your wah pedal is unfortunately the nature of the beast and has been since its inception. In some areas it is worse than others. It is especially bad in the Great Lakes region because the lakes act as large antennas sending out the radio signals to all areas - and all wah pedals. Quote Link to comment Share on other sites More sharing options...
Ollie Posted January 10, 2013 at 03:41 PM Author Share Posted January 10, 2013 at 03:41 PM Merci Glen, Honnetement , je ne me suis meme pas posé la question . J'utilise très peu d'effet en général.. merci du copy paste.. Definately not option 1 or 2 . so I'll check out the other fix tonight see if I can find a solution. thanks anyway. Quote Link to comment Share on other sites More sharing options...
glen Posted January 10, 2013 at 03:54 PM Share Posted January 10, 2013 at 03:54 PM il parait que c'est arrivé sur scene a Jimi Hendrix... Je vois sur les forums du monde entier que c'est un probleme courant. Ca a l'air bien chiant par contre parce que la soluce qui marche pour l'un a pas l'air de marcher pour l'autre, etc. Certains disent juste changer de wah et ca le fait plus. T'as pas l'occaz d'essayer dans ta piaule les wahs des copains? Quote Link to comment Share on other sites More sharing options...
Ollie Posted January 10, 2013 at 05:15 PM Author Share Posted January 10, 2013 at 05:15 PM j'ai pas d'ami Quote Link to comment Share on other sites More sharing options...
Ollie Posted January 11, 2013 at 09:29 AM Author Share Posted January 11, 2013 at 09:29 AM Oui et je parie que la solution n'est valable que pour l'endroit ou tu te trouves ... Avec un peu de chance . Ça va marcher a la maison et pas a un autre endroit .... :-) Trop fort chez dunlop ! Quote Link to comment Share on other sites More sharing options...
gargouill Posted January 11, 2013 at 09:37 AM Share Posted January 11, 2013 at 09:37 AM j'ai pas d'ami Moi non plus. Quote Link to comment Share on other sites More sharing options...
Ollie Posted January 11, 2013 at 12:34 PM Author Share Posted January 11, 2013 at 12:34 PM Moi non plus. :-) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.