mazzic Posted March 3, 2011 at 11:27 AM Share Posted March 3, 2011 at 11:27 AM Bonjour, Une question rapide sur le Badass II , j'aurai pas du ouvrir un sujet pour ça mais j'ai pas trouvé de topic pour m'incruster. Voilà mon souci, J'ai récuperé une basse avec un Badass II et je me demande qu'elle Clé BTR il faut itiliser parceque le 1,5 et le 3 ne passe pas. Je voulais savoir comment vous procedez? A l'arache avec une pointe de couteau? je suis pas trop chaud pour ça... Quote Link to comment Share on other sites More sharing options...
Lutherie T.M Posted March 3, 2011 at 01:07 PM Share Posted March 3, 2011 at 01:07 PM Hello, Normalement sur les Badass c'est de la .05" (1,27mm) Tom Quote Link to comment Share on other sites More sharing options...
Jexmatex Posted March 3, 2011 at 01:22 PM Share Posted March 3, 2011 at 01:22 PM achete un jeux de clé allen au format amerloc et le tour est joué Quote Link to comment Share on other sites More sharing options...
mazzic Posted March 3, 2011 at 04:21 PM Author Share Posted March 3, 2011 at 04:21 PM Ok merci les gars je vais essayer ça Quote Link to comment Share on other sites More sharing options...
growl Posted March 3, 2011 at 04:41 PM Share Posted March 3, 2011 at 04:41 PM (edited) Hopopop Je suis au taquet sur ce topic, j'ai perdu à peu près 4 fois cette putain de clé Inutile de t'emmerder à chercher des clés au format US: 1 - Parce que c'est in-trou-vable ou du moins super chiant (si tu trouves il te faut la 1/20 soit 1.27 mm) 2 - Parce que le vrai bon plan c'est de prendre une clé tout ce qu'il y a de plus commun de 1.3 mm. Ça passe sans problème, la différence de taille est insignifiante... Edit: je viens de relire ton message, quand tu met "la 3 ne passe pas", tu veux dire la 1.3? Edited March 3, 2011 at 04:58 PM by growl Quote Link to comment Share on other sites More sharing options...
Lutherie T.M Posted March 3, 2011 at 06:11 PM Share Posted March 3, 2011 at 06:11 PM http://www.stewmac.com/shop/Truss_rods/Wrenches,_hex_keys/Ball-End_Hex_Keys.html?actn=100101&xst=3&xsr=4896 J'en commande régulièrement pour mes clients. Tom Quote Link to comment Share on other sites More sharing options...
mazzic Posted March 3, 2011 at 06:16 PM Author Share Posted March 3, 2011 at 06:16 PM (edited) Edit: je viens de relire ton message, quand tu met "la 3 ne passe pas", tu veux dire la 1.3? oui c'est ca... ca passe presque mais il manque un poil de c... bientot il faudra faire les réglages avec un microscope http://www.stewmac.com/shop/Truss_rods/Wrenches,_hex_keys/Ball-End_Hex_Keys.html?actn=100101&xst=3&xsr=4896 J'en commande régulièrement pour mes clients. Tom merci pour ton lien Tom Edited March 3, 2011 at 06:13 PM by mazzic Quote Link to comment Share on other sites More sharing options...
growl Posted March 3, 2011 at 09:21 PM Share Posted March 3, 2011 at 09:21 PM Normalement 1.3 ça passe, c'est marrant. J'ai testé sur 2 badass II et avec plusieurs clés 1.3 différentes... Il y a juste 0.03 mm de différence avec la taille "officielle", autant dire que ça se joue à quelques µm. Quote Link to comment Share on other sites More sharing options...
ShavO Posted March 4, 2011 at 08:27 AM Share Posted March 4, 2011 at 08:27 AM Perso j'utilisais un micro tournevis plat, il faisait pile poil la taille de la vis : http://www.cdiscount.com/auto/entretien-auto-reparation/outillage-auto-atelier/tournevis/jeu-de-6-tournevis-de-precision/f-133080314-IX0162928.html?cm_mmc=leguide-_-Auto-_-Entretien+auto+_+Outillage-_-Jeu+de+6+tournevis+de+pr_cision&cid=comp Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.