Jump to content

Uziel

Membre actif
 View Profile  See their activity

  • Posts

    1903

  • Joined

  • Last visited

 Content Type 

Posts posted by Uziel

    Mic Pour Repiquer La Basse

    in Enregistrement et MAO

    Posted

    bon, j'essaie de resumer ceux qui sont conseillàs sur les differents topics :

    (ceux qui les ont deja essayé, pouvez vous laissez vos opinions ?)

    Dossier Audiofanzine :

    Les microphones I

    Les microphones II

    Les microphones III

    Les microphones IV

    AKG D 112

    image1079363395_d1124055c743041bf.jpg

    "- Large-diaphragm dynamic microphone for bass instruments

    - Extremely high SPL capability

    - Classic microphone for stage and studio applications

    The D 112 has earned a well-deserved reputation worldwide as the best kick drum microphone ever made. Heavy-footed drummers won?t faze it, because the D 112 handles up to 160 dB SPL with no audible distortion.

    A specially engineered diaphragm with a very low resonance frequency maintains solid and powerful response below 100 Hz, while a narrow band presence rise at 4 kHz punches through dense mixes with little or no added EQ.

    The result is a kick drum sound that ideally balances precise definition and forceful impact. The D 112 is also an excellent choice for use with bass cabinets, trombones, etc.

    Built in windscreen, SA 60 stand adapter included."

    Polar pattern : cardioid

    Frequency range : 20 to 17,000 Hz

    Sensitivity : 1,8 mV/Pa (-75 dBV)

    Max. SPL : outside measurement range

    Equivalent noise level : 73 dB -A

    Impedance : 210 ohms

    Recommended load impedance : >=600 ohms

    Connector : 3-pin XLR

    Finish : dark gray metallic enamel

    Dimensions : 150 x 70 x 115 mm / 5.9 x 2.8 x 4.5 in.

    Net weight : 380 g / 13.4 oz.

    Shipping weight : 990 g / 2.2 lbs.

    Beyer M 88 TG

    5aac3bb83c.jpg

    "Some products are born classics and the M 88 has to take centre-stage for being far ahead of its time when it was first introduced in the 1960?s. Incorporating a new low-mass diaphragm element, the M 88 TG has earned its place in history in the Kick Drum. Sound engineers have found that the lightening-fast response of the microphones reproduces the complex sound patterns of this instrument resulting in the tight ?thump? without the need for complex signal processing. This characteristic works equally well on other instruments especially where intricate low frequencies and their harmonics need to be captured. The M 88 TG is one of the most frequently specified microphones by sound engineers worldwide and heralded a beyerdynamic contemporary classic as this microphone becomes renown for capturing emotive audio signals.

    -Extended frequency range with rising high end and exceptional bass reproduction

    -High volume-before-feedback

    -Integrated hum-buck coil

    -High SPL handling capability

    -Rugged construction

    -Supplied with microphone clamp and storage bag"

    Transducer type : Dynamic

    Operating principle : Pressure gradient

    Frequency response (close miking) : 30 - 20,000 Hz

    Polar pattern Hypercardioid

    Side attenuation : > 23 dB at 120?

    Open circuit voltage at 1 kHz (0dB = 1V/Pa) : 2.9 mV/Pa ? -30.7 dBV

    Magnetic field suspension : >20 dB ? 50 Hz

    Nominal impedance : 200 ?

    Diaphragm : Hostaphan?

    Case/finish : Brass

    Connector : 3-pin XLR

    Length : 181 mm

    Shaft diameter : 25.5 mm

    Head diameter : 48.5 mm

    Weight without cable : 320 g

    Sennheiser e902

    e902_normal.jpg

    "The cardioid e902 is a dynamic instrument microphone especially designed for deep bass frequency instruments such as kick drums, bass guitar amps and tuba. Faithfully reproducing the lowest frequencies and handling the highest SPLs, the e902 is your bottom end's best friend.

    - Frequency response optimized for kick drum

    - Very fast attack

    - Integrated stand mount

    - Hum compensating coil

    - Shock-mounted capsule

    - Robust metal body"

    Pick Up Pattern : Cardioid

    Frequency Response : 20 - 18,000 Hz

    Sensitivity : 0.2 mV / Pa (at 1kHz) / 0.6mV (at 60kHz)

    Nominal Impedance : 350 ohm

    Min Terminating Impedance : 1000 ohm

    Dimensions : 2.3'' x 5.05''

    Weight approx. : 440g

    Transducer Principle : dynamic

    Connector : XLR, gold-plated

    Sennheiser e602II

    e-602-II_normal.jpg

    "The e 602 II is a cardioid instrument microphone especially suitable for use with bass drums, bass guitar cabs, tubas and other low frequency instruments. Rugged, lightweight aluminium body for stable positioning on long microphone boom arms

    - Lightweight high-performance voice coil construction

    - Fast transient response

    - Low frequency extension

    - Ideal for direct use on the most problematic bass signal

    - Frequency-independent directivity provides isolation from other on-stage signals

    - Humbucking coil

    - Integral stand mount"

    Pick Up Pattern : Cardioid

    Frequency Response : 20 - 16,000 Hz

    Sensitivity : 0,25 mV/Pa; @ 50 Hz 0,9 mV/Pa

    Nominal Impedance : 350 Ohm

    Dimensions : 60 x 153 mm

    Weight : 320 g

    Sennheiser MD421II

    md421-II_normal.jpg

    "The MD421 II continues the tradition of the MD 421 which has been one of Sennheiser's most popular dynamic mics for over 35 years. The large diaphragm, dynamic element handles high sound pressure levels, making it a natural for recording guitars and drums. The MD 421's full-bodied cardioid pattern, and five-position bass control make it an excellent choice for most instruments, as well as group vocals, or radio broadcast announcers. One listen and you'll know why it's a classic."

    Pick Up Pattern : Cardioid

    Frequency Response : 30 - 17,000 Hz

    Sensitivity : 2 mV/Pa +/- 3 dB

    Nominal Impedance : 200 ohms

    Min Terminating Impedance : 200 ohms

    Dimensions : 8.375" x 1.875" x 2"

    Weight : Approx. 14 oz (385 g)

    Shure Beta 52A

    site_img_us_pro_Beta52A_l.jpg

    "The Shure Beta 52?A is a high output dynamic microphone with a tailored frequency response designed specifically for kick drums and other bass instruments. It provides superb attack and "punch", and delivers studio quality sound even at extremely high sound pressure levels.

    The Beta 52A features a modified supercardioid pattern throughout its frequency range to insure high gain-before-feedback and excellent rejection of unwanted sound. A built??“in dynamic locking stand adapter with an integral XLR connector simplifies installation, particularly if the microphone is to be placed inside a kick drum. The stand adapter keeps the microphone position fixed and resists slipping, even when subjected to sharp blows and strong vibrations. A hardened steel mesh grille protects the Beta 52A from the abuse and wear associated with touring.

    - Frequency response shaped specifically for kick drums and bass instruments

    - Built-in dynamic locking stand adapter with integral XLR connector simplifies setup, especially inside a kick drum

    - Studio quality performance, even at extremely high sound pressure levels

    - Supercardioid pattern for high gain before feedback and superior rejection of unwanted noise

    - Hardened steel mesh grille that resists wear and abuse

    - Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration

    - Neodymium magnet for high signal-to-noise ratio output

    - Low sensitivity to varying load impedance

    - Legendary Shure quality and reliability."

    Type : Dynamic (moving coil)

    Frequency Response : 20 to 10,000 Hz

    Polar Pattern : Supercardioid, rotationally symmetrical about microphone axis

    Output Level (at 1,000 Hz) : Open Circuit Voltage: -64 dBV/Pa* (0.6 mV)*1 Pa = 94 dB SPL

    Impedance : Rated impedance is 150 ohms (45 ohms actual) for connection to microphone inputs rated low Z

    Phasin : Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3

    Maximum SPL : 174 dB at 1000 Hz (calculated)

    Connector : Three-pin professional audio connector (male XLR type)

    Case : Silver blue enamel-painted die cast metal with hardened, matte-finished steel grille

    Adjustable, Locking Stand Adapter : Integral, dynamic locking, adjustable through 180 degrees, with standard 5/8"-27 thread

    Net Weight : 605 grams (21.6 oz)

    Shure PG52

    site_img_us_pro_pg52-xlr_l.jpg

    "A high-performance Cardioid Dynamic Kick Drum microphone tuned to capture low-end punch.

    The PG52-XLR includes an Integrated Stand Mount, 15ft (4.57m) XLR to XLR Cable, 5/8" to 3/8" Thread Adapter, and a Storage Bag.

    - Tailored frequency response is smooth and extended. Tuned specifically for kick drum applications.

    - Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in high volume settings.

    - Dynamic cartridge has a simple, rugged coil. Handles extreme volume levels without distortion.

    - Cartridge includes a neodymium magnet for high output level.

    - Internal shock mount for reduced handling noise.

    - Durable metal construction.

    - Integral stand mount.

    - Hardened steel mesh tapered grille that resists wear and abuse.

    - Includes 15ft (4.57m) cable and storage bag. "

    Microphone Type : Dynamic (moving coil)

    Polar Pattern : Cardioid (unidirectional)

    Frequency Response : 30 to 13,000 Hz

    Polarity : Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector

    Output Impedance (at 1000 Hz) : 300 ohms

    Sensitivity (at 1000 Hz) : -55 dBV/Pa, (1.8 mV), 1 Pascal=94 dB SPL

    Electromagnetic Hum Sensitivity : 25 dB equivalent SPL in a 1 millioersted field (60 Hz)

    Connector : Three-pin professional audio connector (male XLR type)

    Case : Die cast metal housing, black matte finish; hardened silver colored, tapered steel mesh grille; built-in locking stand adapter

    Environmental Conditions : This microphone operates over a temperature range of -29 to 57 degrees Celsius (-20 to 135 degrees Fahrenheit), and at a relative humidity of 0 to 95%.

    Weight : Net: 470 g (16.8 oz) Packaged: 1053 g (2 lbs 5 oz)

    Shure SM57

    site_img_us_pro_sm57-lc_l.jpg

    "The legendary Shure SM57 microphone is exceptional for musical instrument pickup and vocals. With its bright, clean sound and contoured frequency response, the SM57 is ideal for live sound reinforcement and recording. It has an extremely effective cardioid pickup pattern which isolates the main sound source while minimizing background noise. In the studio, it is excellent for recording drums, guitar, and woodwinds.

    The SM57?s outstanding performance, legendary reliability, and diversity of application make this "workhorse" the choice of performers, producers, and sound engineers worldwide.

    - Contoured frequency response for clean, instrumental reproduction and rich vocal pickup

    - Professional-quality reproduction for drum, percussion, and instrument amplifier miking

    - Uniform cardioid pickup pattern isolates the main sound source while reducing background noise

    - Pneumatic shock-mount system cuts down handling noise

    - Extremely durable under the heaviest use

    - Frequency response: 40 to 15,000 Hz

    - Replacement cartridge: R57"

    Type : Dynamic

    Frequency Response : 40 to 15,000 Hz

    Polar Pattern : Unidirectional (cardioid), rotationally symmetrical about microphone axis, uniform with frequency.

    Sensitivity (at 1,000 Hz) : Open Circuit Voltage: -56.0 dBV/Pa* (1.6 mV) *(1 Pa = 94 dB SPL)

    Impedance : Rated impedance is 150 ohms (310 ohms actual) for connection to microphone inputs rated low impedance.

    Polarity : Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3.

    Connector : Three-pin professional audio connector (male XLR type).

    Case : Dark gray, enamel-painted, die-cast steel with a polycarbonate grille and a stainless steel screen.

    Dimensions : See User Guide.

    Net Weight (without cable) : 284 grams (10 oz)

    Réflexion à Propos De Mon Matériel

    in Basse

    Posted

    si je peux partager mon experience :

    le nivo volume des groupes de metal (et encore plus death/black) est tres elev? (parfoit 110db 115 sur scene)...

    quand je jouais avec Furia (2 gratteux avec amplis lampes, batteuravec double GC trigg? (dans la sono) , PC pour les samples et chanteur) bah je devais le poussé presque a bloc mon ampli (svt4pro + 810) pour ressortir... a tel point que je me suis dernierement pos? la question pour en acheter un autre...

    pour moi, un 410 n'est pas suffisant

    (jai peut etre une sansamp qui traine pour toi skeld...)

×
×
  • Create New...