denis6bass Posted June 20, 2014 at 07:25 AM Posted June 20, 2014 at 07:25 AM Bonjour, Je vends cette tête d'ampli MARKBASS. Elle m'a rendu de très bons services pendant plusieurs années. Elle fonctionne parfaitement bien. 500 watts de pure bonheur dans un mouchoir de poche. J'en ai fait baver plus d'un avec ce p'tit bout de machin. Excellent état, vendue avec sa housse de transport Markbass, accessoires d'origine et câbles HP. Prix : 400 Euros FDP In. Merci. Denis Specs (Source Markbass) : INPUTS INPUTimpedance 500 Kohm, max. voltage 15 VppEFFECT RETURN impedance 22 Kohm, max. voltage 25 Vpp CONTROLS GAIN-80 dB to +25 dB rangeMUTEpush/pull master volume potLINE OUT LEVELlevel control on front panel PRE/POST EQ (for line out)switch on rear panelMASTER VOLUMEGROUND LIFTswitch on rear panel EQUALIZATION LOWcenter frequency: 40 Hz; level: ±16 dBLOW MID (semi-parametric)frequency 100-800 Hz, level ±16 dBHIGH MID (semi-parametric)frequency 700 Hz-6 kHz, level ±16 dBHIGHcenter frequency: 10 kHz: ±16 dBVPF (Variable Pre-shape Filter)center frequency 380 Hz (cut)VLE (Vintage Loudspeaker Emulator)frequency range 250 Hz-20 kHz (cut) OUTPUT LINE OUT balanced XLR, max. voltage 10 VppEFFECT SENDunbalanced, max. voltage 20 Vpp (pre-EQ)TUNER OUTunbalanced, max. voltage 25 VppSPEAKER OUTspeakon / 1/4" (x2) OTHER WEIGHT4.63 lbs / 2.1 kgDEPTH10.04 in. / 25.5 cmWIDTH10.87 in. / 27.6 cm HEIGHT1.73 in. / 4.4 cm (1U)OUTPUT POWER300W RMS @ 8 ohm, 500W RMS @ 4 ohmPOWER REQUIREMENT100V; 120V; 230V; 240V50/60Hz(Voltage is factory preset according to region of sale) NOTES:Minimum ohm load for all Markbass heads is 4 ohms.
denis6bass Posted July 15, 2014 at 01:09 AM Author Posted July 15, 2014 at 01:09 AM J'étudie toute proposition.
Recommended Posts