Jump to content

Helix / Hx Stomp Club


Faust

Recommended Posts

  • 1 month later...
Il y a 3 heures, jonathan49 a dit :

Bonjour; je voulais vous demander ya un bon compresseur dessus?

Y en a plein !  8 modèles dispo:

https://helixhelp.com/models/dynamics.html

 

Mes deux préférés : le LA-2A pour son émulation très réussie de l'original et le 3 band qui permet de faire pas mal de choses à condition de savoir s'en servir.

Le Red squeeze et le Xotic sont ceux qui sont les plus "plug & play"

  

 

Link to comment
Share on other sites

  • 2 weeks later...

La 2.9 vient de sortir https://line6.com/support/page/kb/effects-controllers/helix/helixhx-290-helix-native-190-release-notes-r916/?fbclid=IwAR22He4CLgdjkkoTZjtzLoELWE3Z_aO9zE-pWd_kufZR6QQ2A_Ox-lmIaoo

 

Voici les nouveautés

Citation

New Amp Models in 2.90

Helix Floor, Helix Rack, Helix LT, Helix Native, HX Stomp

  • Revv Gen Purple, based on* the purple (Gain 1) channel of the Revv® Generator 120

 

New Cab Models in 2.90

Helix Floor, Helix Rack, Helix LT, Helix Native, HX Stomp

  • 1x12 Fullerton, based on* the classic 1953 Fender® 5C3 Tweed Deluxe
  • 1x12 Grammatico, based on* the modern 2016 Grammatico LaGrange

 

New Effects Models in 2.90

Helix Floor, Helix Rack, Helix LT, Helix Native, HX Effects, HX Stomp

  • Distortion > Alpaca Rouge (Mono, Stereo), inspired by* the Way Huge® Red Llama (modded)
  • Distortion > Legendary Drive (Mono, Stereo), based on* the Carvin VLD1 Legacy Drive (high gain channel)
  • Distortion > Xenomorph Fuzz (Mono, Stereo), inspired by* the Subdecay Harmonic Antagonizer
  • Dynamics > Rochester Comp (Mono, Stereo), based on* the Ashly® CLX-52 and created in conjunction with Billy Sheehan
  • Modulation > Pebble Phaser (Mono, Stereo), based on* the Electro-Harmonix® Small Stone phaser
  • Split > Dynamic, Line 6 original. This new Split block type lets you dynamically route signals to Path B, depending on how hard you play. For example, you could roll your guitar's volume back a bit and play clean chords through a Grammatico on Path A and then roll it back up and dig in to blend in a searing Revv Gen Purple lead on Path B
    • Knob 1 (Threshold)—Signals below the Threshold are routed to Path A; signals above the Threshold are routed to Path B
    • Knob 2 (Attack)—Determines how fast the signal routes to Path B once reaching the Threshold
    • Knob 3 (Decay)—Determines how fast the signal returns to Path A once falling below the Threshold
    • Knob 4 (Reverse)—Swaps dynamic path routing. When set to "On", signals below the Threshold are routed to Path B and signals above the Threshold are routed to Path A

*NOTE: All product names used in this document are trademarks of their respective owners and neither Yamaha Guitar Group nor Line 6 are associated or affiliated with them. These trademarks appear solely to identify products whose tones and sounds were studied by Line 6 during sound model development.

Output Meters

Helix Floor, Helix Rack/Control, Helix LT

The following block types display output meters in the inspector when selected:

  • Output
  • Send/Return > Send
  • Send/Return > FX Loop

IMPORTANT! Meters (in any product, not just Helix) are never appropriate for ensuring consistent levels from preset to preset. The models you use, the preset's frequency and dynamic response, your guitar or bass, your pickups, your playback system, your environment, your location in front of (or behind!) your playback system, and especially your bandmates all radically affect the perceived loudness of various presets. It's very common for the meters of one preset to show it's louder than another, while what you hear is the exact opposite. ALWAYS trust your ears when leveling presets, and whenever possible, level presets at stage volume, with the rest of the band playing.

 

Gain Reduction Meters

Helix Floor, Helix Rack/Control, Helix LT

The following block types display a gain reduction meter in the inspector when selected:

  • Dynamics > Compressor (the 3-Band Comp displays three meters)
  • Dynamics > Gate

 

Signal Present/Clip Indicators

Helix Floor, Helix Rack/Control, Helix LT, HX Stomp

The following block types now display a pale green background when signal is present and a bright red background if the block clips:

  • Input
  • Output
  • Send/Return > Send (clip indication only)
  • Send/Return > Return (clip indication only)
  • Send/Return > FX Loop (clip indication only)

 

Link to comment
Share on other sites

Sur la série M (qui sont pour la plupart dans la HX Stomp) ce sont pour moi les plus reussis - pour une basse - .

Très exploitable.

Concernant Source Audio, le Delay-Nemesis est largement au dessus ! Et beaucoup plus riches en textures qu'il n'est possible sur les M5 (et M9) que j'ai (eue).

Pareil pour la reverbe, mais je ne suis pas un grand fan sur basse... 

Le duo Ventris-Nemesis est au-delà du Line6. Au top pour une gratte et synthé.

Mais on cause plus même budget, et les M ont l'avantage le plug &play avec les 6 potards en façade.

Le HX fait modulations, émulations, carte son... C'est pas tout a fait les mêmes produits.

Ils se complètent très bien néanmoins.

Edited by Dmonweb
Link to comment
Share on other sites

merci pour ta réponse @Dmonweb.

En fait je me disais que ça pouvait le faire pour remplacer mon delay et mes modulations et éventuellement en profiter pour d'autres trucs ( simul amplis etc....).

Et le pitch à l'air aussi carrément bien pour simuler une 5 cordes.

Une espèce de boite à tout faire.

Pouvoir l'utiliser aussi à la gratte.

C'est vrai que la reverb à la basse, mouais, à part pour des climats particuliers. Au final je l'utilise presque jamais.

 

Edited by lamoussa
Link to comment
Share on other sites

il y a 13 minutes, lamoussa a dit :

merci pour ta réponse @Dmonweb.

En fait je me disais que ça pouvait le faire pour remplacer mon delay et mes modulations et éventuellement en profiter pour d'autres trucs ( simul amplis etc....).

En delay traditionnel, ça roule, mais ca ne remplace pas le côté "textures-ambiant" (a moins qu'il y ait eu des ajouts dans ce sens) de la Nemesis qui réplique vraiment très bien L'echorec, RE-201 et autres.

Pour les modulations, Line6 est plus rentre dedans... Plus efficace ? Source Audio est plus fin, plus hi-fi, plus studio.

Question de goût. Sauf sur synthé ou filtres, j'en utilise très peu. A la lumite un chorus quand je veux taquiner de la cold wave (la M5 me convient parfaitement).

A savoir qu'avec la C4 + Nemesis, tu peux reproduire phaser, chorus, flanger, octaver, shifter, filtres... Il y a d'excellent presets déjà tout fait...

Sans vouloir vexer, la section filtres (violettes de la serie M) est proche de lninutile en rapport de la C4.

Je suis pas du tout fan des disto Line6, aucune idée des modélisations (mon vieux sansamp me va très bien). Les EQ sont ce que j'utilise de plus en plus : en fin de chaîne je trouve ça vraiment intéressant (pareil, l'EQ de Source Audio est plus fin et plus studio, la M5 me suffit) quand j'utilise la C4.

J'ai tourné longtemps autour de la HX (le côté carte son et le logiciel qui a l'air autrement plus efficace que cette horreur de chez Source Audio)... mais quand on voit le prix d'une M5 en occaz...autour de 50/60€... l'efficacité de la Nemesis, connecté ou non, est redoutable. L'occasion a fait mon choix, je l'ai tapée a très bon prix.

Je regrette pas du tout mon combo de 3 pedales Source Audio, Soleman et Hub en plus : basse, synthé et gratte au top.

Le jour ou j'ai le niveau à la gratte, je tape une Ventris sans hésiter.

 

Le HX Stomp reste quand même le top en rapport possibilités / prix / encombrement. Peut être même ergonomie.

Link to comment
Share on other sites

Il y a 1 heure, lamoussa a dit :

Arghh tu me fais douter @Dmonweb.....Le nemesis peut faire autre chose que delay?

C'est surtout la C4 qui est monstreuse !

Tu peux faire un chorus avec la Nemesis... Mais moins poussé qu'avec la Mercury :wink:

 

Edit : @lamoussa Je devrais recevoir ma carte son dans très peu de temps, lundi ou mardi.

Je ferai des soundclips, tkt ! :)

Edited by Dmonweb
Link to comment
Share on other sites

Yep !

Mais comme on se disait, les 2 marques sont complémentaires, jouent sur le même terrain... normal qu'on se pose des questions. 

Je ferais un peu de comparo delay et modulations line6/SA.

Du son bientôt ! (Avec un gros buzz de masse de la maison, yeah !) 

Edited by Dmonweb
Link to comment
Share on other sites

L'update 2.91 est sortie rapidement. C'est un hotfix pour corriger quelques petits bugs.

Citation

Helix/HX Firmware 2.91

Helix/HX 2.91 and Helix Native 1.91 include important bug fixes, and are strongly recommended for all Helix and HX owners. Doesn't matter what firmware your Helix/HX product is currently running; you can go straight to 2.91.

 

IMPORTANT! Carefully read and follow the update instructions below. If you don't—and then run to the forums asking why it's not working—the interwebs will make fun of you.

 

Updating Helix/HX Firmware to 2.91

Helix Floor, Helix Rack, Helix LT, HX Effects, HX Stomp

STEP 1—Updating HX Edit to 2.90 (assuming you haven't done this already)

  1. Log onto line6.com, download, and install HX Edit 2.90:

 

STEP 2—Updating Helix/HX Firmware to 2.91

  1. If you have Helix Rack/Control, turn off Helix Control. Also, shut down all Line 6 software or any programs that use audio, like DAWs, iTunes, Spotify, video games, etc.
  2. Connect your Helix/HX device to a Mac or PC via USB (do not use any sort of USB hub, which may include the front USB ports on towers) and turn it on.
  3. Launch the new version of HX Edit 2.90 you installed in Step 1 above. If you're not signed in, click "Check for Updates" in the lower right corner and sign in. If you're already signed in, a dialog panel appears, indicating an update is available.
  4. Click "Update Now." A window appears, asking you to back up your Helix/HX hardware. Click OK, optionally rename the backup and/or choose a different destination folder, and then click "Create Backup." IMPORTANT! Note the location where you've saved the backup.
  5. Continue following the prompts. Once updated, the window reads "Update Complete" and your Helix/HX hardware begins rebuilding its presets; wait for this to complete and click "Back to HX Edit."
  6. From the File pull-down menu, click "Restore from backup..." A dialog appears. Click "Restore Backup" and then "Yes."
  7. Once the restore has finished, turn your Helix/HX product off and then on again.
  8. If you have Helix Control connected to Helix Rack, turn on Helix Control. Helix Rack reads "Helix Control must be updated to work properly." Press Knob 6 (OK).

 

Bug Fixes in 2.91

  • Resolves multiple unexpected behaviors that can occur when adjusting the Volume knob, entering the Tuner, or other actions during the first 30 seconds after power up—FIXED
  • Engaging the Tap Tempo switch would calculate a different tempo than intended—FIXED
  • When routing Path 1 to Path 2, the Path 2A and/or Path 2B input blocks could display clipping even when the signal was not—FIXED
  • For presets with parallel paths, the Mixer > Merge block would boost signals by 3dB—FIXED

 

 

Known Issues in 2.91

  • A slight thump can be heard when loading a Distortion > Kinky Boost, Arbitrator Fuzz, or Tycoctavia Fuzz model
  • While backing up, the scribble strip on FS8 can sometimes flicker (Helix Floor, Helix Rack/Control)
  • In very rare cases, leaving the unit on for many hours can sometimes cause reverb models to cease outputting audio
  • In a preset with two IRs blocks, moving one IR block to Path B can sometimes cause the other IR block to reset its Impulse Response to slot 1
  • In rare cases, after exporting and then importing presets using HX Edit, the Split block's bypass state can sometimes change (Helix Floor, Helix Rack/Control, Helix LT)
  • When using Blue Cat Audio's PatchWork VST host software, resizing the Helix Native window may not scale smoothly (Helix Native)
  • The Looper block's Overdub function does not currently respond to incoming MIDI (HX Stomp)
  • While connected to HX Edit, quickly changing models through the IR block can sometimes result in a unit freeze (HX Stomp)

 

Link to comment
Share on other sites

  • 1 month later...
  • PaowZ changed the title to Helix / Hx Stomp Club

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...